Project Colorock, front axel rebuild, exhaust, front bumper, security and more..

[COToy91]

Thought i would post a picture of how i ran the exhaust.....

[COToy91]

I also got a little bored today so i went out in the backyard and took some poser shots

[COToy91]

So her is what i am thinking

I want to link the rear.....

my ideas because i am cheap i am not doing air shocks or coilovers... so it is tj coils or if i feel like being cool 1/4 elliptical

Now i am think a three link just because i am a retard and no matter how much reading i do this double triangulated 4 link stuff just doesnt click in my brain. If you have done either or have suggestion please feel free to add your input.

Oh and as for now i am working on my new OBA using a A/C compressor and i am rhino lining from my body line down on the tenth of may. I also shelled out the money to truss and rebuild the entire front axle and ill do longs when i have the cash.

oh and i made my motorcycle a dual sport bike and i am saving gas now 60+mpg

[COToy91]

I have been up to a lot lately so i will just go one by one on what i have done to the truck......

First up I used a bedliner product caled Gator Guard, i did from the body line down, sliders, and the bottom part of my flat bed

[COToy91]

next up i gave the harrison ac compressor a chance for OBA and it froze up and started smoking in less than 3 min

but this is what i did, and i have a york 210 on the way and ill do it right this time





This is where my air line runs into the tank... Which is the entire bed

[COToy91]

moving right along i installed this AMMOLOCK which you can buy online on the ammo can after some a-hole did this...

[COToy91]

next in line on the list was a sheered off exhaust stud...
so i took the manifold off and will soon replace it with the new stud

[COToy91]

After that i tore down the entire front axel so i can rebuild it and get all the leaks fixed and put some longs in

left side


right side


who else is this old school........

old school longs baby, have not broken them yet

arb, 4.88's
\

Everything out and the front shot with my ten ton jack stands

[COToy91]

  now that it is now ten here i am done for the day, here is all the things going on




I am going to rebuild this for back up air


Whats left of my to do list and a shot of my shop

[KDXSR5]

Where did you source your jackstands? Also, I am a Dennis Kirk customer as well. Truck is looking awesome!

[COToy91]

Napa for the jackstands but you wont want them when you find out how much the pair is... $300

[slabcs]

I've got 4 of those jackstands.  They're sick.

[DTB]

Those are some pimp ass jackstands 

[KDXSR5]

$300!?      Maybe I should start saving then. Or maybe I will go to the truck stop and see if they have any big ones. Usually the truck stops have nice big ones like that.

[DTB]

$300!?      Maybe I should start saving then. Or maybe I will go to the truck stop and see if they have any big ones. Usually the truck stops have nice big ones like that.

300 bucks for a pair is CHEAP......
!!

[COToy91]

So I have not updated this in a long time... school has been kickin my butt this year.

So here are a few things that i have done since the last update

The Trucks Specs as it sits now...

1991 Pickup
-4.3L 700r4 AA adapter to toy case
-Allpro 3" springs, 3" body lift for the TBI intake
-85 front with 4.88's ARB, Fully Trussed, Arp Studs, 30 spline longs and hub gears
-IFS rear with 4.88's Detroit, chromo axles, disk brake conversion
-hunsaker ICON seats (comfy), Ammo can Console
-York OBA
- Tru Cool Aluminum Radiator and flex fan
-All pro ebrake
-new 37" MTR's
-Trail gear winch plate, Smitty 8000lb winch

And Prolly A lot of other things i am forgetting

I just Ordered up a ton of stuff, well for how much i spent it better be

-Davez offroad performance twin stick and shift knobs

And also all this for hydro assit


Surplus Center Ram- $85.95
1.5X6X1 DA HYD CYL SWIVEL EYES
2-Surplus Center Fittings- $3.00
JIC 6M x JIC 6M 90 ELBOW
2- Surplus Center ¼ NPT Plugs- $0.72
OD Tube Clamp Ballistic Fab- $27.99
3-TG Hyd Hoses-$45
2-TG 1/4 pipe to #6 JIC-$6

Other than that i am looking into bead locks from ballistic fab and all the following tcase stuff when i have money

T-Case
Longfield T-Case Output-  $220
Marlin 4.7 T-Case Gears-   $399
Marlin Heavy Spring-         $4
Bud-Built  Xmember-         $199
All-Pro Ebrake Caliper-      $89
23 Spline AA Coupler-       $180

Bead Locks
Ballistic Fab DIY- $150
Hardware From Davez-$49

[COToy91]

Pictures











Dual battery Setup

[COToy91]

I also traded my XR200 for this little toy