We currently are not offering Customer Support on our Forum.
Please use our Store website for: Customer Contact.
 
 

Author Topic: Used Axles and drive shafts  (Read 3692 times)

0 Members and 1 Guest are viewing this topic.

CruzrDave

  • Administrator
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 441
  • Male Posts: 4,631
  • Member since May '02
    • View Profile
Used Axles and drive shafts
« on: Dec 19, 2007, 09:13:40 AM »
Well we need to start clean up the yard. We have 7 used front axles and about 200+ drive shaft cores. If you need anything like this give us a call. The front axle range from 79-85 at a cost of $400. We can truck ship these. We all so have bare housings for sell. $75 for a housing. We have some rear axles to call and ask.

If you’re looking to have drive shaft made them we have the cores. The drive shafts are 84+ and mostly CV. We are currently sorting them by CV styles but I do know we have all 4 styles found from 84-95. When we inventoried them last time we came across a few Tacoma CV too. We will sell a complete CV drive shaft with a slip shaft for $125. If you need just a CV then we have a few by themselves for $100. Rear drive shafts are $75. Please don’t ask us to look for a stock length drive shaft because we just don’t have the man power for that. Most of the drive shafts are cut or being cut in half for better storage and shipping.
Taking back America, one part at a time! :madeinusa:

Hammerhead

  • Offline Crawler Guru
  • ****
  • Turtle Points: 100
  • Male Posts: 564
  • Member since Nov '04
  • Junkyard Dog
    • View Profile
Re: Used Axles and drive shafts
« Reply #1 on: Dec 21, 2007, 09:18:58 AM »
Is that a Full Floater FJ60 axle housing I see on the end in the first pic second row up?
'82 pickup, +3, locked, doubled
'82 pickup, IFS long travel, V8
'85 4runner, V8 rock crawler
'88 X-cab, V6

CruzrDave [OP]

  • Administrator
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 441
  • Male Posts: 4,631
  • Member since May '02
    • View Profile
Re: Used Axles and drive shafts
« Reply #2 on: Dec 21, 2007, 11:49:11 AM »
Good eye.

Its actually a FJ40 with the warn floater kit. I already have someone interested in it. We are looking for all the parts right now, if they decided they don't want it your next.
Taking back America, one part at a time! :madeinusa:

Hammerhead

  • Offline Crawler Guru
  • ****
  • Turtle Points: 100
  • Male Posts: 564
  • Member since Nov '04
  • Junkyard Dog
    • View Profile
Re: Used Axles and drive shafts
« Reply #3 on: Dec 21, 2007, 11:55:47 AM »
Cool, let me know.... :yesnod:
'82 pickup, +3, locked, doubled
'82 pickup, IFS long travel, V8
'85 4runner, V8 rock crawler
'88 X-cab, V6

megolfer

  • Offline Crawler Guru
  • ****
  • Turtle Points: -134
  • Male Posts: 438
  • Member since Dec '03
    • View Profile
Re: Used Axles and drive shafts
« Reply #4 on: Dec 21, 2007, 02:24:08 PM »
Dave did you get my pm about the full floater a couple days ago.  Let me know

CruzrDave [OP]

  • Administrator
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 441
  • Male Posts: 4,631
  • Member since May '02
    • View Profile
Re: Used Axles and drive shafts
« Reply #5 on: Dec 21, 2007, 03:13:36 PM »
Dave did you get my pm about the full floater a couple days ago.  Let me know

Yah, You are first up. I need to find the rests of the parts so I know if your getting a complete axle. I'll give you a call, probably next week. Merry Christmas
Taking back America, one part at a time! :madeinusa:

79coyotefrg

  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1452
  • Male Posts: 22,633
  • Member since May '02
  • Solid axle Toys Rule ! ! !
    • View Profile
    • HotSprings Superlift ORV park
Re: Used Axles and drive shafts
« Reply #6 on: Dec 21, 2007, 03:19:33 PM »
Dave  what about those tires i see  behind the axle rack ??

are they 33's-35's  ??   who's coming to Gilmer next month ?? I know Angelo  was wanting to :hyper:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

megolfer

  • Offline Crawler Guru
  • ****
  • Turtle Points: -134
  • Male Posts: 438
  • Member since Dec '03
    • View Profile
Re: Used Axles and drive shafts
« Reply #7 on: Dec 21, 2007, 05:27:59 PM »
Thanks dave let me know, I am in no hurry. 

Marc P

  • Offline Rock Master
  • ***
  • Turtle Points: 0
  • Posts: 329
  • Member since Dec '05
  • San Diego Crew
    • View Profile
Re: Used Axles and drive shafts
« Reply #8 on: Dec 21, 2007, 08:46:31 PM »
Looking for a CV from a Tacoma 2 piece rear driveshaft.
1998 4Runner--under construction

Weak-Link

  • Offline Rock Master
  • ***
  • Turtle Points: 0
  • Posts: 127
  • Member since Dec '05
    • View Profile
Re: Used Axles and drive shafts
« Reply #9 on: Dec 21, 2007, 09:54:11 PM »
got any front fj60/62 axle's?

Cheesemaker

  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1363
  • Male Posts: 4,525
  • Member since Sep '04
  • Dean Tyler, you were an inspiration to all!!
    • View Profile
Re: Used Axles and drive shafts
« Reply #10 on: Dec 22, 2007, 05:29:15 PM »
Damn why did I run out of $$?  And why did Dave have to post this at Christmas time!  Why couldn't it been more like around tax time!
Miss ya Dean (4THEWKN) & Kyle (KYOTA)!!

4THEWKN~9/17/2006  If it wasn't for you, I'd be driving something other than a Toyota!

My build up ~ project Kilchis! http://board.marlincrawler.com/index.php?topic=32961.0
Zak's truck build ~ http://board.marlincrawler.com/index.php?topic=64319.0;topicseen

79coyotefrg

  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1452
  • Male Posts: 22,633
  • Member since May '02
  • Solid axle Toys Rule ! ! !
    • View Profile
    • HotSprings Superlift ORV park
Re: Used Axles and drive shafts
« Reply #11 on: Dec 22, 2007, 07:19:53 PM »
Damn why did I run out of $$?  And why did Dave have to post this at Christmas time!  Why couldn't it been more like around tax time!
:yupyup:   aint that the truth
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Weak-Link

  • Offline Rock Master
  • ***
  • Turtle Points: 0
  • Posts: 127
  • Member since Dec '05
    • View Profile
Re: Used Axles and drive shafts
« Reply #12 on: Jan 02, 2008, 01:37:21 PM »

Bazzi

  • Offline The 1K Club
  • *
  • Turtle Points: 97
  • Male Posts: 1,095
  • Member since May '04
  • From Reykjavik Iceland...
    • View Profile
    • R&T
Re: Used Axles and drive shafts
« Reply #13 on: Jan 02, 2008, 03:38:04 PM »
I am looking for a set of 9,5" diffs.... or  housings with or with out the axles...  do you guy´s have a pair lying around. ? ? ?    and how much would those cost me?
4runner body on a hilux frame = Hi-Runner.
 2,4 dti duals 2,28 x 2,28 to 8" 5.71 with arb´s  and 39,5" trxus
gathering parts for my goal which is
350 Chevy 700r4 auto to 2.28 x 4.70  and 4.88 9,5" cruisers diffs,diamondaxles and cable lockers, 44" richard cepecs

 
 
 
 
 

Related Topics

3 Replies
2132 Views
Last post May 22, 2004, 06:40:38 PM
by Aaronn
17 Replies
3917 Views
Last post Nov 02, 2005, 01:17:44 PM
by shiftless89
4 Replies
1665 Views
Last post Oct 31, 2012, 01:06:19 AM
by thebigblkbuss
3 Replies
1737 Views
Last post Mar 06, 2017, 07:00:09 AM
by Rockcrawlintoy
8 Replies
2601 Views
Last post Jul 19, 2020, 01:27:00 PM
by OVRAROK