Author Topic: 86 4runner complete EFI & eng (Read 6083 times)

cruiserfj45 · « **on:** Dec 05, 2007, 05:09:09 PM »

SOLDHave complete EFI system including engine (blown head gasket) out of a 86 4Runner w/auto trans. Engine, dash and rear wire harness, fuel tank and computer. Valve cover to oil pan throtle body to exhaust manafold. need money but will hold for best offer. located in fresno. perfect for a EFI swap into a carb truck. selling entire truck. steering system, a/c and front calapers gone. interior present but shot. the rest of the truck is located in Squaw valley, 1hr east of fresno.
http://s252.photobucket.com/albums/hh30/cruiserfj45/22RE/

Plekto · « **Reply #1 on:** Dec 05, 2007, 06:18:42 PM »

How "shot" are the interior door panels and plastic trim pieces along the sides(part under the window next to the rear seats?

SocalWheeler71 · « **Reply #2 on:** Dec 05, 2007, 07:11:08 PM »

Do you have the auto trans/t-case?

my87toy · « **Reply #3 on:** Dec 05, 2007, 07:24:27 PM »

do you have the top? how much if so?
can you pm me with phone #

crawlerdan · « **Reply #4 on:** Dec 05, 2007, 07:27:22 PM »

got the switches for the rear wiper, window, ect??

driveon · « **Reply #5 on:** Dec 05, 2007, 07:47:34 PM »

Do you have the igniton assy? Is it a tilt wheel? Do you have the fuel tank door? Thanks Ron

squirrel84 · « **Reply #6 on:** Dec 05, 2007, 08:02:49 PM »

DIBS on the IFS steering box PMed you my info im in clovis

cruiserfj45 · « **Reply #7 on:** Dec 06, 2007, 12:18:58 AM »

pm'd all above. I have more parts for 2nd gn rigs. Just ask and Ill say ya or na. thanks

GRM · « **Reply #8 on:** Dec 06, 2007, 05:29:52 PM »

How much of the wiring harness do you have?

I also need a fuel pump sending unit, and the rear window glass.

Aaronm · « **Reply #9 on:** Dec 06, 2007, 08:27:44 PM »

I am looking for the pasenger side sliding window in the removable top. Let me know if you have it and the price. Thanks

4runner · « **Reply #10 on:** Dec 07, 2007, 03:00:03 AM »

how much for complete wiring harness? Is it cut any or still one piece?

sinbob · « **Reply #11 on:** Dec 07, 2007, 09:14:22 AM »

If I read right the head gasket is blown on this thing. Is the engine block ok...how much?

cruiserfj45 · « **Reply #12 on:** Dec 10, 2007, 10:38:17 PM »

Been talking to some friends and I'm getting told EFI is worth around $700 complete

. Any one got any ideas. I don't want to rip anyone off but I don't want to loose out. Any tips would be welcomed.

kneedownnate · « **Reply #13 on:** Dec 10, 2007, 11:21:49 PM »

If it were a strong running engine and you had everything efi related, yes it's a good deal. It really banks more off avaiability in any given area. A good 22r/re may only bring $300 in one area, while the same engine may bring twice that in another area where there aren't as many available.

cruiserfj45 · « **Reply #14 on:** Dec 22, 2007, 06:41:26 PM »

Still have lots of parts. Tring to get rid of things in bulk. Have complete body, top and frame w/front/rear axle/suspenshion assy.

cruiserfj45 · « **Reply #15 on:** Dec 31, 2007, 12:22:33 AM »

someone has to need a parts truck

cruiserfj45 · « **Reply #16 on:** Jan 04, 2008, 12:22:43 AM »

dime · « **Reply #17 on:** Jan 04, 2008, 01:19:28 AM »

how much for the wide rear axle complete minus the third

cruiserfj45 · « **Reply #18 on:** Jan 14, 2008, 08:43:23 PM »

skyscraper · « **Reply #19 on:** Jan 14, 2008, 09:43:58 PM »

do you have a rear diff? Also how much of the efi stuff do you have. I'm looking to swap it onto my 84

Captain J · « **Reply #20 on:** Jan 17, 2008, 11:44:58 AM »

do you have the rear tail lights with wire harness?

madhunt · « **Reply #21 on:** Jan 18, 2008, 03:54:06 PM »

how much for your long block do not need intake or harness just the long block??

Weak-Link · « **Reply #22 on:** Jan 18, 2008, 09:44:27 PM »

THIS IS A POST FROM CRUISERFJ45
Sorry I havent responded to anyone latley. I cant log in for some reason. Untill I get it figured out anyone that is intrested in parts please email me at krogens_of_sv@hotmail.com
Thank you

cruiserfj45 · « **Reply #23 on:** Jan 29, 2008, 09:44:23 PM »

84Yota · « **Reply #24 on:** Feb 01, 2008, 12:00:04 AM »

Do you have the idle air control valve for this still? Does it work correctly? http://board.marlincrawler.com/index.php?topic=36294

Thanks!

madhunt · « **Reply #25 on:** Feb 04, 2008, 11:19:44 AM »

Quote from: madhunt on Jan 18, 2008, 03:54:06 PM

how much for your long block do not need intake or harness just the long block??

any reply??

cruiserfj45 · « **Reply #26 on:** Feb 04, 2008, 09:43:45 PM »

Sorry if i forgot to PM someone I am just trying to keep up with 4 sites and all the email. Any thing is for sale I just want to sell things in bulk. I want $500 for the entire thing but for the right price I will seprate. Make an offer.

bolus131 · « **Reply #27 on:** Feb 06, 2008, 03:54:22 PM »

How much do you want for the intake side of the head and all of the wiring from head light to tail light?

cruiserfj45 · « **Reply #28 on:** Feb 06, 2008, 04:56:44 PM »

I am selling the complete engine with ALL the components needed for a EFI swap for $500 but like I said if you want just one part or another make an offer.

cruiserfj45 · « **Reply #29 on:** Feb 07, 2008, 11:34:55 PM »

new pics of eng and wire harness on first post

cruiserfj45 [OP]

cruiserfj45 [OP]

cruiserfj45 [OP]

cruiserfj45 [OP]

cruiserfj45 [OP]

cruiserfj45 [OP]

cruiserfj45 [OP]

cruiserfj45 [OP]

cruiserfj45 [OP]

cruiserfj45 [OP]

Related Topics