Author Topic: unclejs revamp (playing DR )  (Read 69540 times)

0 Members and 1 Guest are viewing this topic.

unclejpl4x4

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 348
  • Male Posts: 3,522
  • Member since Apr '05
  • Broke & rusted
    • myspace
    • Buy me a beer
unclejs revamp (playing DR )
« on: Nov 18, 2007, 08:38:20 AM »
well it's time 2 revamp my truck  it's getting beat/worn   and noisy   I'm tired of noise.

phase I is gonna be  moter/exhaust   and start 2 clean up the frame/ inspection

phase II is get more in 2 the frame/body drivetrain/alignment/ gears/ lockers/ 4" lift / ditch body lift



well here is phase I.  (had the moter for 5months befor i tuched it took 2mounths 2 get every thing done) <--slacker

As i said  the truck is noise mostly from the tires   but the exhaust is shot and moters loud.
I picked up a used moter from the PA tacos. It came out of a smashed 92 truck.
I had the block bored 20 over/cleaned   head cleaned/valve job  intakes tanked/shot beaded
picked up new crank,rockers,waterpump   LC HP oilpump  Ebiulders masterkit / T-cam, LC header,head bolts,MC clutch kit,T-cover.

BTW did i mention it's mid Nov and i got get inspected in Dec.


pic1,2,3 how i got it
pics 4,5,6 in progrss







« Last Edit: Nov 07, 2009, 09:03:37 AM by unclejpl4x4 »
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

unclejpl4x4 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 348
  • Male Posts: 3,522
  • Member since Apr '05
  • Broke & rusted
    • myspace
    • Buy me a beer
Re: unclejs revamp (phase I )
« Reply #1 on: Nov 18, 2007, 08:45:09 AM »
more pics.

some are Little fussy it's the camera  sister gave it 2 me for free :psss:


none of them are in order 2  :stopit:






« Last Edit: Feb 08, 2008, 06:47:28 PM by unclejpl4x4 »
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

unclejpl4x4 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 348
  • Male Posts: 3,522
  • Member since Apr '05
  • Broke & rusted
    • myspace
    • Buy me a beer
Re: unclejs revamp (phase I )
« Reply #2 on: Nov 18, 2007, 08:52:08 AM »
got the moter pulled sat.  Found my moter mounts are bent  so now i need new ones.
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

THK Matt

  • 96ZJ v8
  • Offline Gold Turtle Award
  • *
  • Turtle Points: -442
  • Male Posts: 4,824
  • Member since Jun '07
  • Jeepin North Idaho
    • Buy me a drink
Re: unclejs revamp (phase I )
« Reply #3 on: Nov 18, 2007, 08:53:29 AM »
man that engine looks new now.
1996 Jeep ZJ Laredo Daily/Weekend Wheeler
5.2L V8, 44RE, NP249, 33X12.50R15s on MT Classics, 5.5in Iron Rock Off Road Critical Path F/R

Trailer Build http://board.marlincrawler.com/index.php?topic=103261

2005 Dodge Durango Limited 5.7L Hemi Wife's Daily

Instagram @ taytershubby13

Mistaken

  • Offline Rock Crawl'n
  • **
  • Turtle Points: 0
  • Male Posts: 55
  • Member since Oct '07
  • i like lights
Re: unclejs revamp (phase I )
« Reply #4 on: Nov 18, 2007, 08:58:34 AM »
you could eat off that engine.
1997 gmc sierra short box 4x4
33"mastercraft MT's
cat back duals

*** YELLER ***

  • BIGMIKE SAID I WAS A CLOWN SO .... GUESS THATS THAT
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 314
  • Male Posts: 4,686
  • Member since Oct '05
  • USMC NO BETTER FRIEND NO WORSE ENEMY
    • Buy me a soda
Re: unclejs revamp (phase I )
« Reply #5 on: Nov 18, 2007, 09:03:42 AM »
I would eat the engine  :disturbed:



 :usa: :beerwhack:
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

unclejpl4x4 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 348
  • Male Posts: 3,522
  • Member since Apr '05
  • Broke & rusted
    • myspace
    • Buy me a beer
Re: unclejs revamp (phase I )
« Reply #6 on: Nov 18, 2007, 09:21:49 AM »
tastes like :chicken: and wd40


I am so like 3months behind on this :whip:  but then aging i only drive the truck on sat for like 5 miles, heck  i change the oil like a yr ago and have not hit 3000. 
Having a work truck rocks
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

Mistaken

  • Offline Rock Crawl'n
  • **
  • Turtle Points: 0
  • Male Posts: 55
  • Member since Oct '07
  • i like lights
Re: unclejs revamp (phase I )
« Reply #7 on: Nov 18, 2007, 09:34:08 AM »
 :funny:
1997 gmc sierra short box 4x4
33"mastercraft MT's
cat back duals

fordh8r

  • Offline The 2.5K Group
  • ****
  • Turtle Points: 808
  • Male Posts: 2,582
  • Member since Jan '07
  • when my toyota grows up it'll be just like my chevy!
Re: unclejs revamp (phase I )
« Reply #8 on: Nov 18, 2007, 09:36:45 AM »
Looking pretty good there Unc!  :beerchug: :biggthumpup:   Ehhh,....the engine, that is... :disturbed:

fordh8r

  • Offline The 2.5K Group
  • ****
  • Turtle Points: 808
  • Male Posts: 2,582
  • Member since Jan '07
  • when my toyota grows up it'll be just like my chevy!
Re: unclejs revamp (phase I )
« Reply #9 on: Nov 18, 2007, 10:40:05 AM »

Lady Di

  • Goddess of Mud
  • Internet Lassies
  • Offline Rock Master
  • ***
  • Turtle Points: 0
  • Female Posts: 299
  • Member since Nov '04
Re: unclejs revamp (phase I )
« Reply #10 on: Nov 18, 2007, 10:52:20 AM »

 :inthedark:



BTW did i mention it's mid Nov and i got get inspected in Dec.

Life is like a bowl of beer flavored chocolate covered dog turds.. it makes no sense. :pokinit:

Where is the Mammoth?

How the Mammoth came to be

Number Two :pokinit:

79coyotefrg

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1385
  • Male Posts: 22,610
  • Member since May '02
  • Solid axle Toys Rule ! ! !
    • HotSprings Superlift ORV park
Re: unclejs revamp (phase I )
« Reply #11 on: Nov 18, 2007, 10:53:18 AM »
looks good,  um how did you bend that motor mount  :eek:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

unclejpl4x4 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 348
  • Male Posts: 3,522
  • Member since Apr '05
  • Broke & rusted
    • myspace
    • Buy me a beer
Re: unclejs revamp (phase I )
« Reply #12 on: Nov 18, 2007, 10:55:33 AM »
well um the truck was in a acident befor i got it ( did not know)    the whole front crossmember is tweked 1 fender is newer

have glen u got extra mounts i can get ?
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

79coyotefrg

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1385
  • Male Posts: 22,610
  • Member since May '02
  • Solid axle Toys Rule ! ! !
    • HotSprings Superlift ORV park
Re: unclejs revamp (phase I )
« Reply #13 on: Nov 18, 2007, 10:58:35 AM »
you did get a Marlin clutch to go in there right
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

kneedownnate

  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1006
  • Male Posts: 9,731
  • Member since Oct '04
Re: unclejs revamp (phase I )
« Reply #14 on: Nov 18, 2007, 12:43:22 PM »
you did get a Marlin clutch to go in there right


It's in the first post glen  :slap:  Lookin good unclej :thumbs:
RIP KYOTA

You can go through life being scared of the possible, or you can have a little fun and tease the inevitable.

Give a man venison, he'll eat for a day. Teach a man to hunt Blacktail, he'll be frustrated for life!

DTB

  • Shoutbox Moderator
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 2
  • Male Posts: 7,117
  • Member since Nov '05
  • Squirrels and beer don't mix
Re: unclejs revamp (phase I )
« Reply #15 on: Nov 18, 2007, 01:22:45 PM »
weird.....i would think it would taste like squirrel  :headscratch:





 :talkingn:
RIP KYOTA
Quote
toyminator2000 There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

TheTransporter

  • Offline Rock Crawl'n
  • **
  • Turtle Points: 0
  • Male Posts: 76
  • Member since Aug '07
    • Myspace
Re: unclejs revamp (phase I )
« Reply #16 on: Nov 18, 2007, 01:58:50 PM »
hey, what about a SAS?
you think nobody cares about you? try missing a couple of car payments.

unclejpl4x4 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 348
  • Male Posts: 3,522
  • Member since Apr '05
  • Broke & rusted
    • myspace
    • Buy me a beer
Re: unclejs revamp (phase I )
« Reply #17 on: Nov 18, 2007, 02:00:41 PM »
hey, what about a SAS?

i'll show you why not when i get 2 the frame part.   same reason the mounts are bent  same reasone im afraid 2 unbolt the front end and do a ifs lift
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

TheTransporter

  • Offline Rock Crawl'n
  • **
  • Turtle Points: 0
  • Male Posts: 76
  • Member since Aug '07
    • Myspace
Re: unclejs revamp (phase I )
« Reply #18 on: Nov 18, 2007, 02:26:43 PM »
bent frame?
you think nobody cares about you? try missing a couple of car payments.

Cheesemaker

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1437
  • Male Posts: 4,450
  • Member since Sep '04
  • Dean Tyler, you were an inspiration to all!!
Re: unclejs revamp (phase I )
« Reply #19 on: Nov 18, 2007, 02:29:35 PM »
Your pictures are giving me flashbacks on mine!!  At least with the body lift the bell housing bolts are easier to get to.  Good luck! 
What Marlin clutch did you get?  I put in the turbo 1200lb, and it's way softer than the clutch my nissan had!  I put my foot on the clutch and it falls to the floor.  So, you'll love it!  Very little effort.

Keep posting pictures!
Miss ya Dean (4THEWKN) & Kyle (KYOTA)!!

4THEWKN~9/17/2006  If it wasn't for you, I'd be driving something other than a Toyota!

My build up ~ project Kilchis! http://board.marlincrawler.com/index.php?topic=32961.0
Zak's truck build ~ http://board.marlincrawler.com/index.php?topic=64319.0;topicseen

unclejpl4x4 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 348
  • Male Posts: 3,522
  • Member since Apr '05
  • Broke & rusted
    • myspace
    • Buy me a beer
Re: unclejs revamp (phase I )
« Reply #20 on: Nov 18, 2007, 03:31:00 PM »
OK sunday nov 18

got the old moter striped of swap parts  ready 2 go 2 the parts washer / painting
got the flywheel off  clutch still looks new...... have no clue why i ant easy on her   i hate using brakes.
got the cam gear /water pump done.

It was a good day took awhile 2 get started tho.


As for the frame just the front is tweaked.  ill get pics once it drys out  :tantrum: rain

O and here is my buddy Mario he helped with 89%  of the revamp  :usa:   we had fun with my driveway  glad i pick up the 3 sheets of 3/4 plywood

I'm having trouble with pics...same camera same settings same resize  but files 2 big  :dunno:
« Last Edit: Nov 18, 2007, 05:16:29 PM by unclejpl4x4 »
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

PA_taco_13

  • Offline Rock Master
  • ***
  • Turtle Points: 1
  • Male Posts: 309
  • Member since Dec '05
  • PA Muddin
Re: unclejs revamp (phase I )
« Reply #21 on: Nov 18, 2007, 03:59:06 PM »
JOE !!!!!!!!!!!!!  :biked:  that motor is looking super sweet. very good job man :thumbs: Anytime you want to come back to PA and rebuild my motor you can  that would be sweet  :king: i hope all goes well with the rest of the work  :beerchug:
learn the hard way 
 
"my dixie wrecked"
    
east coast crawler

jimbo74

  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1616
  • Male Posts: 8,730
  • Member since Sep '05
Re: unclejs revamp (phase I )
« Reply #22 on: Nov 18, 2007, 09:51:51 PM »
looks good.... dont trip about the frame, it can all be fixed, you can bend a frame back to spec....
:usa:

The cost of freedom is always high, but Americans have always paid it. And one path we shall never choose, and that is the path of surrender, or submission.

~ John F. Kennedy ~

79coyotefrg

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1385
  • Male Posts: 22,610
  • Member since May '02
  • Solid axle Toys Rule ! ! !
    • HotSprings Superlift ORV park
Re: unclejs revamp (phase I )
« Reply #23 on: Nov 19, 2007, 08:38:27 AM »
:woohoo:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

unclejpl4x4 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 348
  • Male Posts: 3,522
  • Member since Apr '05
  • Broke & rusted
    • myspace
    • Buy me a beer
Re: unclejs revamp (phase I )
« Reply #24 on: Nov 22, 2007, 11:42:40 AM »
happy t-day   got some stuff done.

engine compartment cleaned/painted    assessories  cleaned/painted/mounted

almost ready 2 put in.



I still got pull out the AC parts.   I have decided I'm gonna go with on-board air  but not gonna use the toy comp  found one better/smaller + no oiler  but thats not till later.

I'm so hungry wish people would get here i got turkey 2 eat.

 
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

THK Matt

  • 96ZJ v8
  • Offline Gold Turtle Award
  • *
  • Turtle Points: -442
  • Male Posts: 4,824
  • Member since Jun '07
  • Jeepin North Idaho
    • Buy me a drink
Re: unclejs revamp (phase I )
« Reply #25 on: Nov 22, 2007, 04:06:09 PM »
sweeet dude.
1996 Jeep ZJ Laredo Daily/Weekend Wheeler
5.2L V8, 44RE, NP249, 33X12.50R15s on MT Classics, 5.5in Iron Rock Off Road Critical Path F/R

Trailer Build http://board.marlincrawler.com/index.php?topic=103261

2005 Dodge Durango Limited 5.7L Hemi Wife's Daily

Instagram @ taytershubby13

fordh8r

  • Offline The 2.5K Group
  • ****
  • Turtle Points: 808
  • Male Posts: 2,582
  • Member since Jan '07
  • when my toyota grows up it'll be just like my chevy!
Re: unclejs revamp (phase I )
« Reply #26 on: Nov 22, 2007, 05:59:22 PM »
 :clap2:

79coyotefrg

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1385
  • Male Posts: 22,610
  • Member since May '02
  • Solid axle Toys Rule ! ! !
    • HotSprings Superlift ORV park
Re: unclejs revamp (phase I )
« Reply #27 on: Nov 22, 2007, 07:15:50 PM »
JOE   you HAVE  to use a  compressor  that has oil in the  "case"   the small ones  are oiled by the oil in the freon only  and will burn up  after awhile if used for OBA
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1385
  • Male Posts: 22,610
  • Member since May '02
  • Solid axle Toys Rule ! ! !
    • HotSprings Superlift ORV park
Re: unclejs revamp (phase I )
« Reply #28 on: Nov 22, 2007, 07:19:50 PM »
that thar looks like a  old timing chain guide  :yupyup:


AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

unclejpl4x4 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 348
  • Male Posts: 3,522
  • Member since Apr '05
  • Broke & rusted
    • myspace
    • Buy me a beer
Re: unclejs revamp (phase I )
« Reply #29 on: Nov 22, 2007, 08:47:13 PM »
JOE   you HAVE  to use a  compressor  that has oil in the  "case"   the small ones  are oiled by the oil in the freon only  and will burn up  after awhile if used for OBA

i have been informed about a doge v2  comp that is smaller/ more cfms then toys + don't need a oiler  my buddy sell it :tantrum:  he got a v-mac ( what i have on the work truck)
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

 
 
 
 
 

Related Topics

13 Replies
2826 Views
Last post Nov 29, 2004, 10:17:30 PM
by MikeToyota93
5 Replies
2487 Views
Last post Feb 22, 2009, 07:39:44 PM
by toyomr285
20 Replies
5403 Views
Last post Jul 12, 2007, 01:38:45 PM
by unclejpl4x4
16 Replies
3612 Views
Last post Aug 04, 2007, 02:26:54 PM
by YotaYota
18 Replies
4638 Views
Last post Apr 27, 2009, 02:41:45 PM
by unclejpl4x4