=THE 1 TON DADDY=

[TIMS89CRAWLER]

nice what do they do when they machine them? we have a place up here in oregon that makes converson hubs for those and I never knew how else to get it converted to single wheel

[4DEES]

nice what do they do when they machine them? we have a place up here in oregon that makes converson hubs for those and I never knew how else to get it converted to single wheel

Really? What Company??

You See Where The Wheel Studs Are? Well That Gets Removed And The Hub Body Itself Is Wider Than A Single Wheel Hub, So After The Plate Where The Studs Are Gets Removed, The Hub Body Gets Machined Down To The Thickness Of A Single Wheel Hub. Then I Believe I Have To Get Rotors From A Single Wheel Axle, And I'm Still Not Quite Sure How The Studs Get Re-Attached  , I'm Figuring It Out As I Go Along. It's A Little Bit More Work And A Little More Complicated But It Is Cheaper Than Picking Up A Set Of Single Wheel Hubs. I Would Jump On A Set Of Single Wheel Hubs If I Found Some Cheap Enough 

[TIMS89CRAWLER]

the company up here that makes them is called six states.... they build driveshafts and a bunch of other drivetrain related items.... ya that sounds like it will work fine having them machined though and like you said prolly a lot cheaper too if I remember right those hubs were quite spendy to buy I will check into them again today and see how much they want for them now days

[4DEES]

 I Got A Little Work Done This Weekend Thanks To A Couple Of My Buddys 

MIDGET Cutting Off My Old WMS


Dually WMS Cut Off


The Sweet Smell Of Burned Grease 


Also Went And Picked Up My 42" Iroks And Re-Centered H1's


Took The H1's Apart And STarted Cleaning Them Up So I Can Paint Them


I Found Out That My Buddy max Has A Lathe At His Yard So I Will Be Cutting Down My Hubs This Week  I Will Also Be Ordering Some More Parts This Week 

[TIMS89CRAWLER]

ballin man! cant wait to see it done

[Wermz84]

I love the Sweet smell of burning grease. 


Nice work so far.  will be watching this, want to start learning more about the Beefy axle's. 

[TheCookieMonster]

very nice 

[4DEES]

ballin man! cant wait to see it done

Thanks Brotha Me Either!

I love the Sweet smell of burning grease. 


Nice work so far.  will be watching this, want to start learning more about the Beefy axle's. 

Thanks Man, I'll Be Posting Pics As I Go Along  

[4DEES]

very nice 

Thanks!!

[4DEES]

 Not Much Done Today. Was Looking AT My 60 And Noticed That It Had A Bit Of Surface Rust On It So I Wire Wheeled It All Off And Painted It  Also Picked Up Some More Parts 


Axle Before:


After:


Off-Road Design High Steer Arm


Painted 


Also Got A Ram Off Of My Buddy Max, The Oil On There Is From His Engine 

[TIMS89CRAWLER]

hell ya man those hi-steer arms are beef 

[Loosekannon]

Come on man, use Marlin to host the pictures so I can see them over here too... 

[Tool Pimp]

 

[Loosekannon]

Thanks bro.... 
Looks good Carlos, get those hub bodys turned down and get the crap under your truck 

[Rocksurfer]

This thing is gonna be a monster, and that unsprung weight will help keep you on your rubber side.

[Loosekannon]

and that unsprung weight will help keep you on your rubber side.

We hope 

[Hyena]

done yet? 

[Jud]

This thing is gonna be a monster, and that unsprung weight will help keep you on your rubber side.

I don't think anything can keep him on the rubber side. He should just put HUGE tires on it so he can roll over and still wheel upside down. haha

[TIMS89CRAWLER]

I don't think anything can keep him on the rubber side. He should just put HUGE tires on it so he can roll over and still wheel upside down. haha

I wanna wheel upside down!

[rednk1980]

lookin good those steering arms are straight beef.

[AaronB]

what are you going to about lockers?

[Rocksurfer]

I don't think anything can keep him on the rubber side. He should just put HUGE tires on it so he can roll over and still wheel upside down. haha

[94MtnYote]

what are you going to about lockers?

weld em? 

[4DEES]

This thing is gonna be a monster, and that unsprung weight will help keep you on your rubber side.

I Hope So!!

done yet? 

, I'm Trying To Catch Up To Your @$$!!

I don't think anything can keep him on the rubber side. He should just put HUGE tires on it so he can roll over and still wheel upside down. haha

49" Iroks  

lookin good those steering arms are straight beef.

Thanks Man, Yeah They Are Dude. I Trip Out On How Much Bigger And Heavier They Are Then The Toyota Arms.

what are you going to about lockers?

Going Welded Front And Rear 

[AaronB]

  
Going Welded Front And Rear 

Yeah I think im going to do the same thing

[toywthbdydmge]

Hurry up I need some motivation 

[Hyena]

 
, I'm Trying To Catch Up To Your @$$!!

your gonna pass me up here soon!

[Lizard_lips]

You done yet? You are moving as fast as me haha

[4DEES]

your gonna pass me up here soon!

Wanna Race? 

You done yet? You are moving as fast as me haha

  Yeah No Huh?

Finally Dropped Off My Hubs To Get Machined This Past Weekend, Should Be Done Some Time This Week  STarted Ordering Parts For My Steering, Pics Soon!! 

[rednk1980]