Author Topic: Good to Best engine rebuild kits for the 22R engine...and places to get extras  (Read 2427 times)

0 Members and 1 Guest are viewing this topic.

BigMikeyC

  • Offline Dusty Trails
  • *
  • Turtle Points: 0
  • Male Posts: 6
  • Member since Jul '07
  • "Life's TOO Short,SO WHEEL MORE and CRAWL LOT'S"
    • View Profile
:help:  attempting to rebuild a 22r that had a blown head gasket,then when the guy started to do the work. :smack:.broke the egr and possibly some other stuff to..I AY BE PUTTING MY 7M-GE ENGINE OUT OF MY TRUSTY 86 1/2 TOYOTA sUPRA THAT i WAS GOING TO SELL ..BUT THIS MIGHT BE A BETTER ENDING FOR IT ..THE TRUCK IS AN 86...auto  :thumbdown: THOUGH....I am wonderin if the five speed manual out of the Supra might work too in the switch,if I go that way..I was told the engine will swap on another post with the 5m-ge bellhousing..but I wasn't sure if I got an answer on if the manual trans will work in the truck and hold up and be strong enough for the fun I want to have.. :drooling: I plan on putting a dual ultimate crawlbox in the truck..two 4.7 gearsets :driving: I also was wondering if the drivelines from the supra are sronger than the stock trucks or not to see if they would be the best to modify for the crawlbox setup?It has two with a carrier bearing so if that will work might give me a spare set of drivelines...plus anything else off the supra that could be used to better the vehicle and save money couldn't hurt..and will see me wheeling sooner.. :burnout: My wife wants my new 07 Tacoma to haul around the rig that gets beat and thrashed..and modified..at least till my warranty expires..I only have 1200 miles on it now! And had to buff some scratches from the clearcoat because I couldn't get out a trail I came in on,and the only way out was overgrown with brush...lot's of hell for that one.. :blah:  :hammerhead:  any help would be appreciated..THANKS ALL
Love a Little And Crawl ALOT...But be sure and "play" at Home to keep the WIFE happy....So you can Crawl LOT's MORE !!!!
(Every one in this country that is a legal resident should get a concealed Weapons or Handgun permit ,and carry a gun or weapon!)..That said; I give Ky CCDW courses...Protect our rights and fight for our freedoms, before they're lost to us!!                  God Bless The USA

209toyota1

  • Offline Dusty Trails
  • *
  • Turtle Points: 0
  • Male Posts: 6
  • Member since May '15
  • Toyota engine builder
    • View Profile
    • Buy me a beer
Toyota1 has nice kits very complete with lots of quality parts for $279 (209)toyota1 (209)869-6822
209toyota1.com 209-869-6821

H8PVMNT

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 451
  • Male Posts: 3,507
  • Member since May '07
  • I'LL NEVER MAKE IT...
    • View Profile
Toyota1 has nice kits very complete with lots of quality parts for $279 (209)toyota1 (209)869-6822

OK I'm not a moderator or anything, but rather than writing your post as if you're a enthusiast/customer of Toyota 1 why not just say "Hey I operate Toyota 1 and I sell some very nice engine kits and I would like to invite you to check them out..." .  Sounds like you have a pretty good deal but the way you are posting this just seems kind of deceptive. Looking over your site it seems lke you have a nice shop and know your stuff. Instead of spamming why not just come on here and make a few buddies, then you get business from them anyway.

Also your replying to a post that's like 8 years old, come on man!
« Last Edit: Jun 01, 2015, 07:44:38 AM by H8PVMNT »
I would rather wake up in the middle of nowhere than in any city on earth.
Steve McQueen

"Except for maybe Seattle."  -H8PVMNT

"I plan to hit 300k in this truck"  :)bestgen4runner

 "I'm jealous of your shop. It has concrete and doesn't smell like pickles like the old shop  "  300K

Cheesemaker

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1331
  • Male Posts: 4,482
  • Member since Sep '04
  • Dean Tyler, you were an inspiration to all!!
    • View Profile
Nick, 209Toyota1, first of all welcome to Marlin.  We hope that you can give us information that is beneficial to our community. 

I see your first post you introduced yourself as a Toyota rebuilder, and a businessman, but it was in somebody else's post.  I would recommend that you start out with a introduction post.  http://board.marlincrawler.com/index.php?board=7.0   I would recommend that if you have a product that can help members on this board, just refer them to your signature.  I would put your website in the signature box too.   So, you don't have to keep advertising your business in your posts.  We have other business's that do this, and it makes each post seem more personal, instead of an advertisement.  I went to your site, and you do seem to do really nice work, and would like to help support you one day.  It's just a turn off for some.  And its kinda bad taste to be posting your business on another business's website/forum without the owner's consent.  I would recommend that you call MarlinCrawler and talk to Mike, or PM Bigmike http://board.marlincrawler.com/index.php?action=profile;u=122 about advertising on their site. Or since your in Modesto, maybe a drive to their facility and see them personally.  I don't see a issue, since you don't sell parts that would conflict with MarlinCrawler.  But Mike has final say.  I recommend this to everyone that tries to sell a new product on this site.  Even if its somebody that has a laser cutter/CNC or whatever in their garage.   


So please, help contribute to our little community, and some of us can help you in return.  I have been thinking of some EGR delete plates, so I might be contacting you on yours.   :thumbs:

 :welcome: to Marlin!!

Miss ya Dean (4THEWKN) & Kyle (KYOTA)!!

4THEWKN~9/17/2006  If it wasn't for you, I'd be driving something other than a Toyota!

My build up ~ project Kilchis! http://board.marlincrawler.com/index.php?topic=32961.0
Zak's truck build ~ http://board.marlincrawler.com/index.php?topic=64319.0;topicseen

 
 
 
 
 

Related Topics

22 Replies
3212 Views
Last post Nov 19, 2004, 08:56:12 AM
by 79coyotefrg
12 Replies
2587 Views
Last post Jan 22, 2005, 01:01:04 PM
by Fireimp141
19 Replies
3984 Views
Last post May 18, 2005, 07:22:09 PM
by jedimasteryoda
1 Replies
944 Views
Last post Apr 16, 2006, 08:37:54 PM
by brainlessfool
7 Replies
2121 Views
Last post Sep 26, 2011, 01:05:53 PM
by twistedtoy92