63" chevys 2WD 3 leaf w/ overload cut $75
![](http://img65.imageshack.us/img65/3239/springsgu6.jpg)
83 rear housing- spring pads 7" x 2.5" with 1.5" lift built in, cut and turned to correct pinion angle $40 bare $60 w/ complete axles $80 w/ trac bar
![](http://img65.imageshack.us/img65/4070/housingwv8.jpg)
trac bar 43" long w/ shackle $25
![](http://img403.imageshack.us/img403/7597/tracbarsa4.jpg)
rollbar for 1st gen $75
![](http://img65.imageshack.us/img65/3549/rollbarta4.jpg)
rear shackles 6" eye to eye $25
![](http://img45.imageshack.us/img45/8176/1000020imgyu1.jpg)
home built flip kit w/ 8" x 2.5" u bolts (fits chevy width springs) $25
![](http://img45.imageshack.us/img45/7758/1000021imgsf3.jpg)
bumpstops. bolts to toy frame in factory location $20
![](http://img65.imageshack.us/img65/9963/1000019imgve3.jpg)
winch cable good shape only a couple pulls on it. replaced with synth line. I believe its 5/16" x 125' $50
![](http://img65.imageshack.us/img65/1897/winchcablegr4.jpg)
will ship small pieces at your expense. heavy stuff pickup only
located outside Portland Or
pm if interested