Well i am in the process of upgrading my lift on my 84 4runner to the 5" marlin kit
, so the lift that is on it has to go.
I am not sure what brand it is, but it is a 4" kit with blocks in the rear. I am not sure if it is a stock spring in the rear, or a slight lift spring with a block. The leaf springs have yellow friction pad's in between the leaf's front and back (i believe they are like that in the rear too, which is why i think it is a small lift spring, but i will double check). Whats to be included, the 4 springs, 2 rear blocks, 4 shocks (Front bodies are dented from the steering arm, but still work), tortion bar extention thing
, and i think that is about all. i cut the u-bolts to remove the old lift, so those are gone! I just checked, the front springs are 48", 24 from pin to eye on both sides. The rear springs are 48" as well, 27" to pin and 21" to pin. I added some pics also.
I will measure the length of the springs and post them up later today.
Here are some pics of the lift on the 4runner with 35's and no shackle lift:
Here is a pic of the rears, they are still on
I am not looking for much for this, maybe $250 OBO. i can ship, but buyer pays for shipping. i am always open for trades as well! I just want it gone.
I also have 2 sets of yota axle's. Looking to get $300 a set, OBO.1st set is an 83 with partial truss in good shape. The 3rd's have 4:10 gears, and are out for inspection (the diff's are open, no lockers). Spindles, birfs, and rear axle's are in good shape. A knuckle rebuild kit is needed due to i just tossed the old felt when i tore them down. ( i don't have pics of the knuckles, but can get em).
2nd set is out of an 85 (has the full truss the length of the front axle). These axles need to be cleaned up and painted. The 3rd's have 4:10 gears and are open, no locker. Spindles, birfs, and rear axle's are in good shape. A knuckle rebuild kit is needed due to i tossed the old felt when i tore them down. ( i dint have pics of the knuckles, but can get em).
All items are in Bristol, CT 06010. Shipping would be on your dime, but i would ship for actual shipping price thru UPS most likely. Trades, what ya got!!!
