Well i am in the process of upgrading my lift on my 84 4runner to the 5" marlin kit
![turtle3 :turtle3:](https://board.marlincrawler.com/Smileys/marlin/c045.gif)
, so the lift that is on it has to go.
I am not sure what brand it is, but it is a 4" kit with blocks in the rear. I am not sure if it is a stock spring in the rear, or a slight lift spring with a block. The leaf springs have yellow friction pad's in between the leaf's front and back (i believe they are like that in the rear too, which is why i think it is a small lift spring, but i will double check). Whats to be included, the 4 springs, 2 rear blocks, 4 shocks (Front bodies are dented from the steering arm, but still work), tortion bar extention thing
![Slap! :slap:](https://board.marlincrawler.com/Smileys/marlin/slap.gif)
, and i think that is about all. i cut the u-bolts to remove the old lift, so those are gone! I just checked, the front springs are 48", 24 from pin to eye on both sides. The rear springs are 48" as well, 27" to pin and 21" to pin. I added some pics also.
I will measure the length of the springs and post them up later today.
Here are some pics of the lift on the 4runner with 35's and no shackle lift:
![](http://www.zuwharrie.com/gallery/albums/userpics/14284/IMG_1964.JPG)
![](http://www.zuwharrie.com/gallery/albums/userpics/14284/IMG_1963.JPG)
![](http://www.zuwharrie.com/gallery/albums/userpics/14284/IMG_1965.JPG)
![](http://www.zuwharrie.com/gallery/albums/userpics/14284/IMG_1966.JPG)
![](http://www.zuwharrie.com/gallery/albums/userpics/14284/IMG_1974.JPG)
![](http://www.zuwharrie.com/gallery/albums/userpics/14284/IMG_2018.JPG)
![](http://www.zuwharrie.com/gallery/albums/userpics/14284/IMG_2016.JPG)
![](http://www.zuwharrie.com/gallery/albums/userpics/14284/IMG_2017.JPG)
Here is a pic of the rears, they are still on
I am not looking for much for this, maybe $250 OBO. i can ship, but buyer pays for shipping. i am always open for trades as well! I just want it gone.
I also have 2 sets of yota axle's. Looking to get $300 a set, OBO.1st set is an 83 with partial truss in good shape. The 3rd's have 4:10 gears, and are out for inspection (the diff's are open, no lockers). Spindles, birfs, and rear axle's are in good shape. A knuckle rebuild kit is needed due to i just tossed the old felt when i tore them down. ( i don't have pics of the knuckles, but can get em).
![](http://www.zuwharrie.com/gallery/albums/userpics/14284/IMG_2000.JPG)
2nd set is out of an 85 (has the full truss the length of the front axle). These axles need to be cleaned up and painted. The 3rd's have 4:10 gears and are open, no locker. Spindles, birfs, and rear axle's are in good shape. A knuckle rebuild kit is needed due to i tossed the old felt when i tore them down. ( i dint have pics of the knuckles, but can get em).
![](http://www.zuwharrie.com/gallery/albums/userpics/14284/IMG_2003.JPG)
All items are in Bristol, CT 06010. Shipping would be on your dime, but i would ship for actual shipping price thru UPS most likely. Trades, what ya got!!!
![Beer Chug\'n :beerchug:](https://board.marlincrawler.com/Smileys/marlin/beerchug.gif)