Topic: 79-85 Aisin Hub FSM Diagrams

[KYOTA]

scanned from my 83 FSM

[KYOTA [OP]]

[KYOTA [OP]]

[KYOTA [OP]]

[bajamil]

do you have 13-30? my snapring looks different...

[wildchild1066]

thanks

[unclejpl4x4]

i the yr

http://personal.utulsa.edu/~nathan-buchanan/93fsm/suspensionandaxle/14freewhee.pdf

[04 rocko taco]

i the yr

http://personal.utulsa.edu/~nathan-buchanan/93fsm/suspensionandaxle/14freewhee.pdf

That one is a 93. (It's a very commomly shared link around toyota boards.... and it says 93fsm in the link itself. )

[2ndGenToyotaFan]

This may help someone....

http://forum.ih8mud.com/79-95-toyota-truck-tech/149776-rebuilding-aisin-locking-hub-locking-hub-rebuild.html

[dende]

thanks these are getting hard to come by.

[KYOTA [OP]]

do you have 13-30? my snapring looks different...

page 13-30 just shows how to remove the lockout from the hub. are you talking about the snapring thats on the end of the axle?

[954toy]

nice. yes hard to find in deed @dende. the hubs would be nice. stupid auto lockers on my 95

[Wheelie_Pete]

I got fed up with the crappy videos on YouTube for hub reassembly.  Most of the hub is easy, but the key to making it work is the Clutch/spring/Pawl assembly.  It's not intuitive and it's not really well illustrated in the FSM either.  Here's a newb friendly video I put together on that crucial part of the assembly (clutch/spring/pawl) that is applicable to all years of AISIN manual locking hubs.

[Someday]

I got fed up with the crappy videos on YouTube for hub reassembly.  Most of the hub is easy, but the key to making it work is the Clutch/spring/Pawl assembly.  It's not intuitive and it's not really well illustrated in the FSM either.  Here's a newb friendly video I put together on that crucial part of the assembly (clutch/spring/pawl) that is applicable to all years of AISIN manual locking hubs.

Cool video!

[Rusty Hilux]

I got fed up with the crappy videos on YouTube for hub reassembly.  Most of the hub is easy, but the key to making it work is the Clutch/spring/Pawl assembly.  It's not intuitive and it's not really well illustrated in the FSM either.  Here's a newb friendly video I put together on that crucial part of the assembly (clutch/spring/pawl) that is applicable to all years of AISIN manual locking hubs.

Cool video Pete. Thanks for sharing your knowledge. Subscribed.

[Jakey poo]

I got fed up with the crappy videos on YouTube for hub reassembly.  Most of the hub is easy, but the key to making it work is the Clutch/spring/Pawl assembly.  It's not intuitive and it's not really well illustrated in the FSM either.  Here's a newb friendly video I put together on that crucial part of the assembly (clutch/spring/pawl) that is applicable to all years of AISIN manual locking hubs.

Thanks for doing this video, really helped yesterday when putting my hubs back together!