Author Topic: REAR DRIVELINE (Read 3310 times)

kiyul4130 · « **on:** Dec 27, 2006, 07:08:26 PM »

im looking for a rear 2pc driveline for a 3rd gen truck. i guess basically any 2pc driveline will work but i need the slip end part, the entire 2nd peice from the carrier bearing to the 3rd member. thanks
-kyle

Tice · « **Reply #1 on:** Dec 27, 2006, 07:23:43 PM »

I might still have one. I'll check tommrow afternoon for ya!

kiyul4130 · « **Reply #2 on:** Dec 27, 2006, 08:23:23 PM »

Quote from: Tice on Dec 27, 2006, 07:23:43 PM

I might still have one. I'll check tommrow afternoon for ya!

thanks, everyone ive talked to in this town thats wheels a toyota doesnt have one or doesnt know what im talking about. an finding toyota junk at the yards here in this town is basically impossible. mines been bent since rubicon (mcr5)and im over not being able to drive past 50mph on the highway.

88Rokyoat · « **Reply #3 on:** Dec 27, 2006, 09:20:22 PM »

Quote from: kiyul4130 on Dec 27, 2006, 08:23:23 PM

mines been bent since rubicon (mcr5)and im over not being able to drive past 50mph on the highway.

thats because you have a 3.slow

Tice · « **Reply #4 on:** Dec 28, 2006, 03:32:43 PM »

No luck man, I have the piece that goes from the t-case to the carrier bearring but thats it. Sorry.

kiyul4130 · « **Reply #5 on:** Jan 01, 2007, 04:20:33 PM »

btt, someone help me!

kneedownnate · « **Reply #6 on:** Jan 01, 2007, 08:46:03 PM »

Don't most people chuck these in the dumpster the first chance they get, then switch to a solid driveline?

kiyul4130 · « **Reply #7 on:** Jan 03, 2007, 02:51:26 PM »

Quote from: kneedownnate on Jan 01, 2007, 08:46:03 PM

Don't most people chuck these in the dumpster the first chance they get, then switch to a solid driveline?

i dont know. all i do know is, is that i am going duals by atleast april and i dont want a built one made and then have to get it re-done when i get duals in. so a stock one is perfect till then.

kiyul4130 · « **Reply #8 on:** Jan 15, 2007, 06:56:13 PM »

ttt.

!!!!

Ramrod · « **Reply #9 on:** Jan 18, 2007, 06:50:03 AM »

just go get your damn duals already!!! comeawn!!! i'll asemble it if your down for a party in chico sometime

ToYocRawleR · « **Reply #10 on:** Jan 20, 2007, 06:43:44 PM »

Dude i think i have one, i'll have to check. I'll let you know tomorrow.

kiyul4130 · « **Reply #11 on:** Jan 20, 2007, 08:09:26 PM »

Quote from: ToYocRawleR on Jan 20, 2007, 06:43:44 PM

Dude i think i have one, i'll have to check. I'll let you know tomorrow.

awesome, pm me. thanks

kiyul4130 · « **Reply #12 on:** Jan 20, 2007, 08:53:23 PM »

Quote from: TEAM RAMROD on Jan 18, 2007, 06:50:03 AM

just go get your damn duals already!!! comeawn!!! i'll asemble it if your down for a party in chico sometime

theres always somethin going on up here. anytime you want to come up let me know or chris. we'll party. beer on tap at my place

ToYocRawleR · « **Reply #13 on:** Jan 21, 2007, 06:39:32 PM »

The piece i have is the carrier bearing to the t-case.

kiyul4130 · « **Reply #14 on:** Jan 21, 2007, 09:24:05 PM »

Quote from: ToYocRawleR on Jan 21, 2007, 06:39:32 PM

The piece i have is the carrier bearing to the t-case.

ahhhhhhhhh!!!!!!!!!!!!!!!! no! damn it. thanks anyways. i need from carrier to the 3rd.

btt someone help me.

Duffil · « **Reply #15 on:** Jan 21, 2007, 09:44:24 PM »

OK, how long are you gonna need it? I might end up using the ends from mine to build a new shaft. I have a 2nd gen Xtra Cab 2pc sitting in storage. The carrier bearing is new, but I dunno if it'll bolt up(might need the smoke wrench!) cuz we jacked it up getting it out, as I had it welded in to lower it. I am hella south of you though, do you ever head this way, or know anyone headed down around stockton/modesto? If it will work, you can use it, as long as I get it back one day.

51504ROCK · « **Reply #16 on:** Jan 22, 2007, 01:32:42 PM »

I am pretty sure I have what you are looking for. I will let you Know.

DeMented Toys · « **Reply #17 on:** Jan 23, 2007, 08:17:32 AM »

I have a couple here in Southeast Missouri...

51504ROCK · « **Reply #18 on:** Jan 23, 2007, 04:40:16 PM »

Quote from: 51504ROCK on Jan 22, 2007, 01:32:42 PM

I am pretty sure I have what you are looking for. I will let you Know.

nope i have the wrong side. sorry

kiyul4130 · « **Reply #19 on:** Jan 24, 2007, 06:58:57 PM »

ya i need the end to the 3rd.

edit: were you at the roundup this year? you have a rear marlin bumper as well on your truck right? i have the red toy like yours that bashed his bed and broke out my window. i dont know if its you nice truck again.

toyotamobing · « **Reply #20 on:** Jan 28, 2007, 11:23:06 AM »

i have an entire rear driveshaft both sides and carrier bearing...

88Rokyoat · « **Reply #21 on:** Feb 02, 2007, 09:45:19 AM »

I know of a buddy that has one he might sell. Its out of a two wheel drive. he is in grass Valley. let me know if you want to find out about him selling it and price. OR you could sac up and do the duals now. I can have your cases together in about an hour. then we can start drinkin that captain you still owe me.

kiyul4130 · « **Reply #22 on:** Feb 02, 2007, 03:55:36 PM »

Quote from: 81rokyoat on Feb 02, 2007, 09:45:19 AM

I know of a buddy that has one he might sell. Its out of a two wheel drive. he is in grass Valley. let me know if you want to find out about him selling it and price. OR you could sac up and do the duals now. I can have your cases together in about an hour. then we can start drinkin that captain you still owe me.

youll deffinetally get your captn'. ill find out this week for sure about the duals. talk to that guy about the driveline. i might have one already but talk to him.

kiyul4130 · « **Reply #23 on:** Feb 15, 2007, 03:22:51 AM »

over it i think at this point.

Duffil · « **Reply #24 on:** Feb 16, 2007, 07:02:02 PM »

why not make your own 1pc dline--is it a DD?

ALCORN · « **Reply #25 on:** Feb 17, 2007, 08:49:18 AM »

I got one $100.00.send a e-mail and i send pic's.

kiyul4130 · « **Reply #26 on:** Feb 20, 2007, 09:45:22 PM »

im pretty much over it. ive went 5+ months with a bent driveline and ill have duals in no later than a month half from now. might as well keep the crap driveline. i can save that $100 for stuff for hammers.

kiyul4130 [OP]

kiyul4130 [OP]

kiyul4130 [OP]

kiyul4130 [OP]

kiyul4130 [OP]

kiyul4130 [OP]

kiyul4130 [OP]

kiyul4130 [OP]

kiyul4130 [OP]

kiyul4130 [OP]

kiyul4130 [OP]

Related Topics