0 Members and 3 Guests are viewing this topic.
toyminator2000 – There has to be dumb people in order for there to be smart people
the bushings inside the spindles support the axles. replace them, even worn bushings will let the axle sit on the outer seals and cause leaking gear oil
so I got new axle bushings in there but the axle is still binding on the spindle hard with no play to be centered by outer hub. The binding is on the side of the spindle not top nor bottom of spindle, so I don't think is the shims on the knuckles....I've played with the shims with no results.BTW how much is the axle shaft supposedto extend outside of the spindle?
Started by yotadork83 Parts Wanted
Started by Rocktoy2 General 4WD Discussion
Started by smitty9902 Parts Wanted
Started by NCK4L Parts Wanted
Started by datkinson 1984-1988: How-To Guides