Author Topic: HELP E-locker Up front/ Marlin Springs and U Bolts (Read 1342 times)

RAZOR · « **on:** Dec 08, 2006, 02:23:58 AM »

Okay, Here is the Problem. I am tryin to run a elocker up front in my Sas Pickup. I went to put the axle under tonight and up came a problem. First, The U bolt does not fit through,

Second, The very bottom leaf of the spring pack is hitting on the top lock sensor bolt.

Anyone OUt there have any suggestions or solutions?

Thanks Ahead of Time,

Hayes

FIREBALL · « **Reply #1 on:** Dec 08, 2006, 11:10:50 AM »

I didn't have this problem on mine. Everything should fit. I know it was real close when it went togeather. At the very most all I could see was a little grinder work to make a little more clearance.
Call the shop....they are very helpful.

KDC · « **Reply #2 on:** Dec 08, 2006, 06:34:51 PM »

http://www.pirate4x4.com/forum/showthread.php?t=459180&page=3

Post #69 by 4RnrRick, this should help your second problem and in turn, may help your first problem.

Author Topic: HELP E-locker Up front/ Marlin Springs and U Bolts (Read 1342 times)

RAZOR

HELP E-locker Up front/ Marlin Springs and U Bolts

FIREBALL

Re: HELP E-locker Up front/ Marlin Springs and U Bolts

KDC

Re: HELP E-locker Up front/ Marlin Springs and U Bolts

Related Topics


	Author Topic: *HELP* E-locker Up front/ Marlin Springs and U Bolts (Read 1342 times) 0 Members and 1 Guest are viewing this topic. RAZOR Rock Master Turtle Points: 0 Posts: 143 Member since Oct '05 It's all about the LongFields *HELP* E-locker Up front/ Marlin Springs and U Bolts « on: Dec 08, 2006, 02:23:58 AM » Okay, Here is the Problem. I am tryin to run a elocker up front in my Sas Pickup. I went to put the axle under tonight and up came a problem. First, The U bolt does not fit through, Second, The very bottom leaf of the spring pack is hitting on the top lock sensor bolt. Anyone OUt there have any suggestions or solutions? Thanks Ahead of Time, Hayes Logged Finally Straight Axled, e-Locker, 5.29's, Lockright Rear, 13" travel tractor spline driveshaft, CV eliminator, Fully Gusseted front axle, Marlins almighty 5" Trail Flex lift Kit, 36" TSL's In Marlin Crawler, I trust. If you got the Nuts, Follow my Ruts! Lift It, Fat Chicks Can't Jump! Motocross, Because it Requires 2! FIREBALL The 1K Club Turtle Points: 190 Posts: 1,202 Member since Feb '03 Hi Ho Marlin....u talkin to me Re: *HELP* E-locker Up front/ Marlin Springs and U Bolts « Reply #1 on: Dec 08, 2006, 11:10:50 AM » I didn't have this problem on mine. Everything should fit. I know it was real close when it went togeather. At the very most all I could see was a little grinder work to make a little more clearance. Call the shop....they are very helpful. Logged KDC Rock Master Turtle Points: 153 Posts: 180 Member since May '05 Axle Breaking Goodness Re: *HELP* E-locker Up front/ Marlin Springs and U Bolts « Reply #2 on: Dec 08, 2006, 06:34:51 PM » http://www.pirate4x4.com/forum/showthread.php?t=459180&page=3 Post #69 by 4RnrRick, this should help your second problem and in turn, may help your first problem. Logged The Phuzzy Cankle: 'http://board.marlincrawler.com/index.php?topic=97465.0 Old build: http://board.marlincrawler.com/index.php?topic=19351.0

RAZOR

***HELP*** E-locker Up front/ Marlin Springs and U Bolts

FIREBALL

Re: ***HELP*** E-locker Up front/ Marlin Springs and U Bolts

KDC

Re: ***HELP*** E-locker Up front/ Marlin Springs and U Bolts

Related Topics

HELP E-locker Up front/ Marlin Springs and U Bolts

Re: HELP E-locker Up front/ Marlin Springs and U Bolts

Re: HELP E-locker Up front/ Marlin Springs and U Bolts