I have an unwelded cage that was made from 1.5x.120 hrew tubing. There is a hoop that would go behind the seats at the rear of the cab. The other two pieces would go from the floor near your foot, up the dash and to the roof and then back to the hoop. There are a couple of straight pieces that would be used accross the dash and accross the hoop. Could easily be shortened to fit a standard cab. These tubes are NOT notched, no floor plates or bolts included. This was custom bent tubing that is now has a bit of surface rust and needs to be cleaned up. NO SHIPPING. 200.00 OBO.