Topic: T-case Gear Ratio ?

[Rocksurfer]

What is the stock gear ratio for a Sammi? I just wanna figure out what my ratio is gonna be with a Klune-V David. I have 31's and stock R&P's.

[MiniSimp]

First Gear: 3.652:1
Transfer Case Low: 1.816
Stock Axle Gears: 3.73:1

[Rocksurfer [OP]]

Thanks Mini 

Can't wait to play with the Klune, it's gonna be fun!!

[Rocksurfer [OP]]

First Gear: 3.652:1
Transfer Case Low: 1.816
Stock Axle Gears: 3.73:1

Well that would make my Sammi 101.423:1

That's with stock gears, I wonder what I'd get if I change out the R&P and tcase gears?

[Rocksurfer [OP]]

Holy sh_ _!!

3.652 x 6.50 x 4.1 x 5.83 = 567.40:1

[Tusker]

Yeah, a doubler on a Sami case can get you crazy low.  The lowest r&p I would run is 5.12's.  I am not sure they can survive all that gearing, but the lower ratios are notoriuos for stripping out.

I believe the low range ratio in the stock box is 2.268:1 btw.

[Rocksurfer [OP]]

I believe the low range ratio in the stock box is 2.268:1 btw.

If that's the case (haha) then I'm even lower than I thought.


It crawled really good yesterday, but I did find that I was to low for some stuff and I would shift it to 4wd high and leave the crawl box in low and that made a big difference in getting through stuff. In that setting it is still very low but gave me some accelleration to power through.

[Slowzuk]

I need tcase gears!!

 

[Rocksurfer [OP]]

I need tcase gears!!

 

What do you want, I have a friend that probably has what you want?