Author Topic: reverse weber on zuk 1.3??  (Read 3262 times)

0 Members and 1 Guest are viewing this topic.

psychotoy

  • Offline Rock Crawl'n
  • **
  • Turtle Points: 27
  • Posts: 102
  • Member since Aug '04
  • Crawling with Marlin
    • View Profile
reverse weber on zuk 1.3??
« on: Oct 27, 2005, 06:19:16 PM »
If there is anybody out there running this setup, what is the proper jetting?, I bought a sammi with this setup and the engine is being choked with fuel, any suggestions would be appreciated guys
"Yeah, I remember stompin' my feet in Eddie's couch"
-Rick James-

79coyotefrg

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1425
  • Male Posts: 22,629
  • Member since May '02
  • Solid axle Toys Rule ! ! !
    • View Profile
    • HotSprings Superlift ORV park
Re: reverse weber on zuk 1.3??
« Reply #1 on: Nov 03, 2005, 05:42:59 PM »
you'll need the smallest possible jet for that,  and im not sure it wont still run rich
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

zuknstien

  • Offline Rock Crawl'n
  • **
  • Turtle Points: 104
  • Male Posts: 47
  • Member since Jun '05
  • Crawling with Marlin
    • View Profile
Re: reverse weber on zuk 1.3??
« Reply #2 on: Nov 05, 2005, 12:50:39 PM »
knew a guy that had this setup everytime he went down a hill it would die though so I dont think he had it setup right
86 zuk
89 22RE(in zuk)
power steering with high steer
toyota axles

psychotoy [OP]

  • Offline Rock Crawl'n
  • **
  • Turtle Points: 27
  • Posts: 102
  • Member since Aug '04
  • Crawling with Marlin
    • View Profile
Re: reverse weber on zuk 1.3??
« Reply #3 on: Nov 07, 2005, 10:55:29 PM »
knew a guy that had this setup everytime he went down a hill it would die though so I dont think he had it setup right


That is exactly what mine does, but going up hills it never dies, thus running it backwards
"Yeah, I remember stompin' my feet in Eddie's couch"
-Rick James-

TEXXX

  • Offline Crawler Guru
  • ****
  • Turtle Points: 814
  • Male Posts: 423
  • Member since Mar '05
  • Crawling in Cool, CA
    • View Profile
Re: reverse weber on zuk 1.3??
« Reply #4 on: Nov 08, 2005, 01:31:09 PM »
knew a guy that had this setup everytime he went down a hill it would die though so I dont think he had it setup right
that is what it is supposed to do
RIP Gatekeeper you will be missed!

zuknstien

  • Offline Rock Crawl'n
  • **
  • Turtle Points: 104
  • Male Posts: 47
  • Member since Jun '05
  • Crawling with Marlin
    • View Profile
Re: reverse weber on zuk 1.3??
« Reply #5 on: Nov 10, 2005, 12:59:50 PM »
I good stock carb will run at any angle.
86 zuk
89 22RE(in zuk)
power steering with high steer
toyota axles

Kris

  • Offline Rock Crawl'n
  • **
  • Turtle Points: 94
  • Male Posts: 91
  • Member since Oct '05
  • Crawling with Marlin
    • View Profile
Re: reverse weber on zuk 1.3??
« Reply #6 on: Nov 11, 2005, 10:10:55 AM »
Had a friend his ran rich all the time and died the same way going up hills.  I ran dual side draft carb on a 86 model.  I loved them and had little problems if any.  The only major problem was getting them tuned in.  I would recommend the stock carb it works this best even on a nonstock motor.
Better to be judged by twelve than carried by six!!

You can grow, You can hide it, You can build it:
BUT WE WILL FIND IT!!  K-9

79coyotefrg

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1425
  • Male Posts: 22,629
  • Member since May '02
  • Solid axle Toys Rule ! ! !
    • View Profile
    • HotSprings Superlift ORV park
Re: reverse weber on zuk 1.3??
« Reply #7 on: Dec 03, 2005, 05:51:35 PM »
my zuk  was a 88 and had the stock carb  it ran perfect even at a 45* angle,  up or down
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

TEXCRAWLER

  • Offline Crawler Guru
  • ****
  • Turtle Points: -586
  • Male Posts: 566
  • Member since Aug '05
  • ROCK GOD!!!
    • View Profile
Re: reverse weber on zuk 1.3??
« Reply #8 on: Dec 04, 2005, 02:50:34 AM »
Did I here Weber carb.   :reg:    I tried running the weber on my 88 samy 1.3 and had nothing but problems. In fact it caught my engine on fire and   :flamer:   If your gona stay with a 1.3 use a stock carb.  thats my  :twocents:
87' Samurai, Dimond-F, Tacoma-R, 5.29 F-detroit R-spool,6 Stud knukles, 4-link coils F&R, Duel Marlin chromoly 4.7 Toyota T-Case, 39.5 TSL's, 8000 lb winch, 6 piont cage, Full Hydro, Sidekick 1.6 16V, Thourly header, LongField 30 splines, 115" WB, crawlin @ 459:1

I could care less for turtle points.

psychotoy [OP]

  • Offline Rock Crawl'n
  • **
  • Turtle Points: 27
  • Posts: 102
  • Member since Aug '04
  • Crawling with Marlin
    • View Profile
Re: reverse weber on zuk 1.3??
« Reply #9 on: Dec 07, 2005, 06:12:18 PM »
Did I here Weber carb.   :reg:    I tried running the weber on my 88 samy 1.3 and had nothing but problems. In fact it caught my engine on fire and   :flamer:   If your gona stay with a 1.3 use a stock carb.  thats my  :twocents:


I wish I could, I bought it with the weber on it, I may have to hunt down a stock carb
"Yeah, I remember stompin' my feet in Eddie's couch"
-Rick James-

 
 
 
 
 

Related Topics

11 Replies
3310 Views
Last post Jan 29, 2009, 09:15:11 PM
by THK Matt
3 Replies
2427 Views
Last post Dec 31, 2009, 05:42:51 PM
by 86toyota
2 Replies
1396 Views
Last post Apr 21, 2009, 05:22:15 AM
by Hawk Thor
1 Replies
1005 Views
Last post May 14, 2009, 12:24:47 PM
by 79coyotefrg
5 Replies
1377 Views
Last post Aug 24, 2009, 09:36:04 AM
by ia yota