Topic: Kiyul4130s rig

[Hyena]

i ordered mine with no holes and then drilled them out at work.  i actually have to pull my double ended one off and drill on hole out to 1 inch for my ram.

[kiyul4130 [OP]]

damn. a 1" hole is big. i thought a 3/4" hole wouldnt leave enough meat on either side of the hole in the steering arm to be strong but i guess its not as big as i thought. 1" though is huge.

[kiyul4130 [OP]]

well looks like i found my 60 with the help of callen. it sounds like were picking it up this evening when he gets off work. got it for cheap to and its a SRW.

[DTB]

  its a SRW.

  help the noob...whats that?

[kiyul4130 [OP]]

when you see 1 ton front ends there listed as DRW or SRW. dually or single rear wheel. this means what hubs are on the axles.  from the looks of it if this pans out right ill be getting the axle for free and quite possibly getting paid for picking it up!! 

[Ramrod]

if this pans out right ill be getting the axle for free and quite possibly getting paid for picking it up!! 

bling bling

[kiyul4130 [OP]]

seriously, im just twiddling my thumbs right now waiting. its a whole truck with a good drivetrain and someone might want the motor for a grand...

[TheCookieMonster]

nice

[Sluice Box Hero]

just sold my tons to kyle.

D60 4.10 Welded
rock equipment histeer arms
DOM tie rod
8" hydro ram  and mount all set up for the axle
calipers ground to fit 15" wheels

rear 14 bolt 4.10 Welded
disc brakes
perches set up for toyota width
sky style shock tabs

lets just say hes getting a smokin deal.

****look for a small re-build up on my truck soon****

Callen

[lilbuddy]

just sold my tons to kyle.

D60 4.10 Welded
rock equipment histeer arms
DOM tie rod
8" hydro ram  and mount all set up for the axle
calipers ground to fit 15" wheels

rear 14 bolt 4.10 Welded
disc brakes
perches set up for toyota width
sky style shock tabs

lets just say hes getting a smokin deal.

****look for a small re-build up on my truck soon****

Callen

Interesting

Looks like a phone call will be in order tomorrow

[kiyul4130 [OP]]

im ready to go wheeling already....maybe now by the 4th of july? i hope. callens putting clark planetary's under his truck, with gumbo 67s.... should be sweet.

[lilbuddy]

im ready to go wheeling already....maybe now by the 4th of july? i hope. callens putting clark planetary's under his truck, with gumbo 67s.... should be sweet.

SICK

Dude get it done by the 4th. Im goin to the con then, you should come.

Ill call you tomorrow after i fix my truck. Its still all sittin sideways on my street all gay like. Im not too stoked.

[Sluice Box Hero]

callens putting clark planetary's under his truck, with gumbo 67s.... should be sweet.

hahahahahahahaha

youll all see what im up to later this week.  lets just say its going to be beefy.

kyle you should be able to get everything all ready by the 4th no problem.  hell im even going to make it.

Callen

[kiyul4130 [OP]]

im glad these 1 tons are going to be a plug an play setup haha

[kiyul4130 [OP]]

this suuuuuuuuuuckss........ 

[Doof]

whats stopping you from hanging the axle?

[TheCookieMonster]

whats stopping you from hanging the axle?

x2....

[olivedrab85]

he's gonna have to widen the front hangers to bolt up a 60

[NorCalToy]

just sold my tons to kyle.

D60 4.10 Welded
rock equipment histeer arms
DOM tie rod
8" hydro ram  and mount all set up for the axle
calipers ground to fit 15" wheels

rear 14 bolt 4.10 Welded
disc brakes
perches set up for toyota width
sky style shock tabs

lets just say hes getting a smokin deal.

****look for a small re-build up on my truck soon****

Callen

[TheCookieMonster]

the front may not be yota width...the rear is

[iNfErNaL]

The rear is easy,he just has to move the perches,the front will be a little tricky but not much...Now get on it Kyle!!!!!!.I wanna see this thing with 1 Tons already.Are you gonna keep the 37s or go bigger?.

[kiyul4130 [OP]]

i dont have the axles yet. im still trying to sell the truck i got. ya i need to widen the front. the rear is basically a bolt up deal. no im gunna get 42" iroks infernal.

[iNfErNaL]

no im gunna get 42" iroks infernal.

Nice!!!...Can't loose with 42s 

[Thomas P]

x2   

[NorCalToy]

why doesnt anybody go any bigger? seems like one tons could handle it?

[Hyena]

42's are about max for a stock front dana 60.

[NorCalToy]

how expensive is it too hop it up enough to handle say 44s or so?

[Thomas P]

unless you go longfields $$$$$$$$$

[Hyena]

a lot of money.

[Thomas P]

yeah about $2k for the longfield cv's for the 60, then they wont warrany anything over 47"s