Topic: its to tall

[sumedumbkid]

really my truck is to tall i need to lower the front about 3' aney suguestions i have rears up front and bumerang <SP> shackles but there barly longer than stock i need ides

eric

[5spd]

Just take one of these to it....  :~~:...

No really, what is it you have and how is it set up, why not dump blocks and go with a lower spring lift? more info would help.

[sumedumbkid [OP]]

ok here is a better discription no blocks no arched springs the rear are custom hybred chevys and the front are just rear 3 leaf and the shackles to make them fit so from what i see i have flat springs all the way around i did manage to get it levle by adding a leaf to the rear and a little diffrent shackle in front


eric

[sumedumbkid [OP]]

ok here is why i want it lower i use this truck fro maney purposes and one of wich is racing. the pacific north west 4 wheel drive asso. has races like cross country barrels obstical  and technical courses so i need it low and flexy becous i cant afford to build 2 rigs right now i know im not going to be the fastes   i just want to have fun  but be safe at the same tim and 33 with 6" of lift wasent gonna cut it now im like 2' of lift and i feal much better i did loose a little groung clearance but verry little
so dose every one think im nutz now

eric

[over_rev]

"so dose every one think im nutz now"
                  YUP

[Squirrel_4_life]

so why don't you go and get yourself a ricer? those are pretty low. the only reason you should be lowering your rig is to have a lower center of gravity on the rocks. I say pick one hobby wheelin :chug: :chug: or barrel   lowered truck racing

[Brandon]

' = feet. if you lower it 3 feet it must be damn tall!

[freds40]

I noticed that too Brandon. I just had this image of a toy flopping pulling out of the driveway.

[88runner]

the guy need a ladder to get inside of it.