Author Topic: Parting out 1986 4Runner (Read 9056 times)

the_white_shadow · « **on:** Jul 09, 2018, 09:50:41 AM »

I picked this 4runner up for the transmission/t-case to swap into another toyota truck i am working on. Most of the rest of it is for sale. What doesnt sell is going to scrap. The engine is a 22re and will run on starting fluid. I installed a new pump in the tank and fuel filter. Only thing i can see is missing is the intake boot to the throttle body.

Parts im keeping or has already been spoken for:
5-speed trans and t-case including shifters and trim pieces
22re engine harness
IFS box and power steering related stuff
IFS rear end
IFS front wheel hubs
front/rear driveshafts

Prices on a few things.
wheels and tires $250 (tires are in good shape with plenty of tread 31x10.5x15)
22re with 271k on it: $350
front diff: $150
doors for half doors: $40
Frame and whats left of the tub: $100 (no title)
Seats: $100
Misc interior pieces: Make offer
Roll bar: $80
taillights in good shape: $50 for the pair
tailgate (not sure if the window goes up): $150
IFS locking hubs: $60
Calipers (lets assume for cores): $25
Gas tank and new fuel pump: $100
rear leafs: $60

If you see something you want thats not listed, let me know. I can ship small parts if they will fit in a flat rate USPS box.

Located in East Bernard (77435) but can meet in the Houston area for free.

redneckcustoms13 · « **Reply #1 on:** Jul 09, 2018, 11:42:02 AM »

Rear window relay?

the_white_shadow · « **Reply #2 on:** Jul 09, 2018, 12:48:31 PM »

Quote from: redneckcustoms13 on Jul 09, 2018, 11:42:02 AM

Rear window relay?

Im assuming its there. Shoot me a fair number and ill ship it to you. No clue if it works or not.

OCD · « **Reply #3 on:** Jul 09, 2018, 01:18:57 PM »

Is that airflow meter a #22250-35020? If so, and if it isn’t all corroded inside, I’d be interested....
How much you want shipped to 95032?

the_white_shadow · « **Reply #4 on:** Jul 09, 2018, 01:49:03 PM »

Quote from: OCD on Jul 09, 2018, 01:18:57 PM

Is that airflow meter a #22250-35020? If so, and if it isn’t all corroded inside, I’d be interested....
How much you want shipped to 95032?

I’ll check the number and take a few pics of the condition and get back to you. $100 shipped?

redneckcustoms13 · « **Reply #5 on:** Jul 09, 2018, 03:37:37 PM »

$20+ shipping not sure I've never bought one.

:)bestgen4runner · « **Reply #6 on:** Jul 09, 2018, 03:50:22 PM »

If the clock works. I would live to have it. $25 + shipping to 98038 ?

the_white_shadow · « **Reply #7 on:** Jul 09, 2018, 03:51:22 PM »

Quote from: redneckcustoms13 on Jul 09, 2018, 03:37:37 PM

$20+ shipping not sure I've never bought one.

$25 shipped works for me. PayPal aletz12485@yahoo.com if that works for you.

the_white_shadow · « **Reply #8 on:** Jul 09, 2018, 03:52:30 PM »

Quote from: :)bestgen4runner on Jul 09, 2018, 03:50:22 PM

If the clock works. I would live to have it. $25 + shipping to 98038 ?

The clock does work. $30 shipped work for you? Same PayPal as above.

:)bestgen4runner · « **Reply #9 on:** Jul 09, 2018, 03:55:26 PM »

Quote from: the_white_shadow on Jul 09, 2018, 03:52:30 PM

The clock does work. $30 shipped work for you? Same PayPal as above.

Yes that's fine. Let Me get My paypal up and I will send You the money. Thanks

redneckcustoms13 · « **Reply #10 on:** Jul 09, 2018, 04:29:10 PM »

Sent. Thanks.

the_white_shadow · « **Reply #11 on:** Jul 09, 2018, 04:31:45 PM »

Quote from: redneckcustoms13 on Jul 09, 2018, 04:29:10 PM

Sent. Thanks.

Received. I’ll try and get in sent out in the next couple of days. Thanks.

OCD · « **Reply #12 on:** Jul 10, 2018, 08:08:31 AM »

Quote from: the_white_shadow on Jul 09, 2018, 01:49:03 PM

I’ll check the number and take a few pics of the condition and get back to you. $100 shipped?

Hmmm... Send me a few pics when you can. I might still be interested. Corrosion recently ate one of mine, need a new spare for the parts shelf....

the_white_shadow · « **Reply #13 on:** Jul 10, 2018, 08:21:52 AM »

Quote from: OCD on Jul 10, 2018, 08:08:31 AM

Hmmm... Send me a few pics when you can. I might still be interested. Corrosion recently ate one of mine, need a new spare for the parts shelf....

Will do. Ill take a couple pics this evening when i get home from work and post them up.

the_white_shadow · « **Reply #14 on:** Jul 11, 2018, 04:43:19 AM »

Quote from: OCD on Jul 10, 2018, 08:08:31 AM

Hmmm... Send me a few pics when you can. I might still be interested. Corrosion recently ate one of mine, need a new spare for the parts shelf....

Some pics of the MAF
PArt Number:

OCD · « **Reply #15 on:** Jul 12, 2018, 07:32:31 AM »

I appreciate the pics, thanks man. I’m gonna hold out for a unit that doesn’t need quite so much cleanup. I may regret this, I know these parts are getting harder and harder to find, but only need it for a spare so no rush...hopefully...

the_white_shadow · « **Reply #16 on:** Jul 12, 2018, 08:00:25 AM »

Quote from: OCD on Jul 12, 2018, 07:32:31 AM

I appreciate the pics, thanks man. I’m gonna hold out for a unit that doesn’t need quite so much cleanup. I may regret this, I know these parts are getting harder and harder to find, but only need it for a spare so no rush...hopefully...

No worries. The outside could use a clean for sure but the inside is spotless. Let me know. I’m not firm on my price by any means.

Capra · « **Reply #17 on:** Jul 16, 2018, 11:22:53 AM »

Are the grille and headlamp doors OEM?

the_white_shadow · « **Reply #18 on:** Jul 16, 2018, 12:47:23 PM »

Quote from: Capra on Jul 16, 2018, 11:22:53 AM

Are the grille and headlamp doors OEM?

As far as I know, yes. As you can see in the pic, the driver headlamp bezel is cracked on the outside.

Capra · « **Reply #19 on:** Jul 16, 2018, 07:19:03 PM »

Quote from: the_white_shadow on Jul 16, 2018, 12:47:23 PM

As far as I know, yes. As you can see in the pic, the driver headlamp bezel is cracked on the outside.

Damn, that’s the one I really need. You can easily tell the oem apart from the aftermarket ones. The aftermarkets are thin and bend easily.

redneckcustoms13 · « **Reply #20 on:** Jul 17, 2018, 04:48:47 AM »

OEM says Toyota on the back side of it.

arlindsay1992 · « **Reply #21 on:** Jul 17, 2018, 08:37:36 AM »

Could you take a picture of the top of the A/C compressor and the hoses going into it? Also of the A/C lines behind the grill? Mine somehow corroded super bad between the steel nuts and the aluminum male threads at most of the connections. Barely got it all apart but everything is super crunchy going back together. If they are the same as what I have I have a list of A/C parts I'd like.

dixiepc · « **Reply #22 on:** Jul 18, 2018, 08:06:35 PM »

Redneck check your PM's

the_white_shadow · « **Reply #23 on:** Jul 19, 2018, 04:21:43 AM »

Quote from: arlindsay1992 on Jul 17, 2018, 08:37:36 AM

Could you take a picture of the top of the A/C compressor and the hoses going into it? Also of the A/C lines behind the grill? Mine somehow corroded super bad between the steel nuts and the aluminum male threads at most of the connections. Barely got it all apart but everything is super crunchy going back together. If they are the same as what I have I have a list of A/C parts I'd like.

For some reason im just now seeing this. I guess the notification function isnt working. Ill take these pics this evening and post them up for you.

arlindsay1992 · « **Reply #24 on:** Jul 19, 2018, 10:57:35 AM »

No rush, I'm not in a hurry.

the_white_shadow · « **Reply #25 on:** Jul 20, 2018, 07:08:24 AM »

Quote from: arlindsay1992 on Jul 19, 2018, 10:57:35 AM

No rush, I'm not in a hurry.

Pics of the AC stuff.

:)bestgen4runner · « **Reply #26 on:** Jul 20, 2018, 10:04:48 AM »

good pictures

arlindsay1992 · « **Reply #27 on:** Jul 20, 2018, 10:33:27 AM »

Yep, that's the same as mine. As long as the big nuts break free and turn nice on all the fittings I'm interested. How much do you want for both hoses to/from the compressor, both compressor manifolds (little blocks on top of the compressor held on by Allen head bolts), both of the metal lines that attach to the drier, the metal line that runs along the inside of the fender from the core support to the evaporator, and the pipe inside the evaporator box circled in this diagram? Basically, all the hoses/pipes in the A/C system + the manifolds. I'll pay shipping costs.

toyrunner · « **Reply #28 on:** Jul 23, 2018, 03:40:26 PM »

I'm looking for the "ramp" under the tailgate attached to the underfloor that the "U" shaped spring rides on. That helps the tailgate not slam down and assists in lifting to close. Price shipped to 91106?

the_white_shadow · « **Reply #29 on:** Jul 24, 2018, 05:13:08 AM »

this thing?

the_white_shadow [OP]

the_white_shadow [OP]

the_white_shadow [OP]

the_white_shadow [OP]

the_white_shadow [OP]

the_white_shadow [OP]

the_white_shadow [OP]

the_white_shadow [OP]

the_white_shadow [OP]

the_white_shadow [OP]

the_white_shadow [OP]

the_white_shadow [OP]

Related Topics