Author Topic: Chilkat 2RZ/3RZ Conversion Mounts (Read 2102 times)

Pappy · « **on:** May 17, 2018, 07:18:42 AM »

[SOLD]

I bought these in May 2013. I'm not going to use them. $50 plus the ride from 87120/NM.

redneckcustoms13 · « **Reply #1 on:** May 17, 2018, 07:27:13 AM »

Thats a good deal if they work. It seems to be a toss up of who got good ones and who got some that make the engine set at too much of an angle.

HogCanyonHopper · « **Reply #2 on:** May 17, 2018, 08:39:11 AM »

You can use shims to adjust that angle. I have 2 sets of those mounts. They are legit.

redneckcustoms13 · « **Reply #3 on:** May 17, 2018, 10:09:19 AM »

I have a set and I shimmed 5/8" on the passenger side and had to cut over a half inch out of the drivers side.

Pappy · « **Reply #4 on:** May 17, 2018, 10:17:33 AM »

Quote from: redneckcustoms13 on May 17, 2018, 07:27:13 AM

Thats a good deal if they work. It seems to be a toss up of who got good ones and who got some that make the engine set at too much of an angle.

Which is why I gave the date purchased ... in case it might matter.

Author Topic: Chilkat 2RZ/3RZ Conversion Mounts (Read 2102 times)

Pappy

Chilkat 2RZ/3RZ Conversion Mounts

redneckcustoms13

Re: Chilkat 2RZ/3RZ Conversion Mounts

HogCanyonHopper

Re: Chilkat 2RZ/3RZ Conversion Mounts

redneckcustoms13

Re: Chilkat 2RZ/3RZ Conversion Mounts

Pappy [OP]

Re: Chilkat 2RZ/3RZ Conversion Mounts

Related Topics


	Author Topic: Chilkat 2RZ/3RZ Conversion Mounts (Read 2102 times) 0 Members and 1 Guest are viewing this topic. Pappy Trade Count: (0) Rock Crawl'n Turtle Points: 68 Posts: 41 Member since May '04 Crawling with Marlin Chilkat 2RZ/3RZ Conversion Mounts « on: May 17, 2018, 07:18:42 AM » [SOLD] I bought these in May 2013. I'm not going to use them. $50 plus the ride from 87120/NM. Chilkar mounts (1)_sm.jpg (125.9 kB, 605x341 - viewed 2987 times.) « Last Edit: Jul 16, 2018, 03:02:56 PM by Pappy » Report to moderator Logged redneckcustoms13 Trade Count: (+1) The 2.5K Group Turtle Points: 7674 Posts: 2,513 Member since May '15 Re: Chilkat 2RZ/3RZ Conversion Mounts « Reply #1 on: May 17, 2018, 07:27:13 AM » Thats a good deal if they work. It seems to be a toss up of who got good ones and who got some that make the engine set at too much of an angle. Report to moderator Logged 83 long bed 2wd sas, 3rz, w56, duals with 4.7 rear, 4.88 elock front, spartan rear, 39.5 iroks 01 double cab hunting truck 06 tacoma street truck HogCanyonHopper Trade Count: (+9) The 1K Club Turtle Points: 7319 Posts: 1,224 Member since Jul '10 Re: Chilkat 2RZ/3RZ Conversion Mounts « Reply #2 on: May 17, 2018, 08:39:11 AM » You can use shims to adjust that angle. I have 2 sets of those mounts. They are legit. Report to moderator Logged http://board.marlincrawler.com/index.php?topic=88478.0 Where are we going? And why are we in a handbasket? My friend is goin to moan this weekend - RockcrawlinJK redneckcustoms13 Trade Count: (+1) The 2.5K Group Turtle Points: 7674 Posts: 2,513 Member since May '15 Re: Chilkat 2RZ/3RZ Conversion Mounts « Reply #3 on: May 17, 2018, 10:09:19 AM » I have a set and I shimmed 5/8" on the passenger side and had to cut over a half inch out of the drivers side. Report to moderator Logged 83 long bed 2wd sas, 3rz, w56, duals with 4.7 rear, 4.88 elock front, spartan rear, 39.5 iroks 01 double cab hunting truck 06 tacoma street truck Pappy [OP] Trade Count: (0) Rock Crawl'n Turtle Points: 68 Posts: 41 Member since May '04 Crawling with Marlin Re: Chilkat 2RZ/3RZ Conversion Mounts « Reply #4 on: May 17, 2018, 10:17:33 AM » Quote from: redneckcustoms13 on May 17, 2018, 07:27:13 AM Thats a good deal if they work. It seems to be a toss up of who got good ones and who got some that make the engine set at too much of an angle. Which is why I gave the date purchased ... in case it might matter. Report to moderator Logged redneckcustoms13 and HogCanyonHopper like this