0 Members and 2 Guests are viewing this topic.
Rubber sandwich on the bolt.jam nut...nut....washer....rubber.....engine mount.....rubber.....frame mount.....rubber.....washer.....bolt head
easy fix, use a rubber bolt
I plan to put on a carb and simplify my life. The temperature sender never worked anyway, (I think something to do with incompatibility between the charade and rocky parts) so I'll use the aftermarket gauge I put in. The oil pressure warning light is driven by a switch, at most I will need a resistor to make that work. The charging circuit on the alternator should be the same voltage, and I'm going to start out with the Daihatsu alternator anyway, so the battery light in the dash should work. Aside from that, there isn't much wiring on a carbureted engine. But surprises are the name of the game here, and I'm sure I'll run into something I don't expect. Maybe once it's working I'll figure out how to get the 22RE in there. That will probably involve a new wiring harness and a new gauge cluster, at least.
An L52 is about 5" shorter if you can find one.
Whereabouts? I may be making a trip to Oregon in October sometime.
Started by johnyreb69 Project Research and Build-Ups
Started by ronezrocky Newbie Questions
Started by ag86IL Project Research and Build-Ups
Started by River Axle/Differential/Steering
Started by utherjorge « 1 2 » Project Research and Build-Ups