Author Topic: #turdburglar  (Read 9375 times)

0 Members and 1 Guest are viewing this topic.

seebrookmeyer

  • Offline Rock Crawl'n
  • **
  • Turtle Points: -50
  • Male Posts: 60
  • Member since Jul '16
  • Crawling with Marlin
    • View Profile
Re: #turdburglar
« Reply #30 on: Dec 16, 2020, 07:40:11 AM »
Bumps are set. Drag link is just laying in there, at full bump it "fits". It will come down a bit on the driver side once it is actually set in place as its currently sitting on top of the pitman arm. End of the day I will likely need to notch the frame to make room.  need to spend some time getting the steering box in it's new home and see where all the components will actually land. I have both a flat and drop pitman arm so I have some different options. 

The towers I purchased with the 4WU kit are not going to work. Since I pushed the axle forward from the intended location with this kit they are pretty much in the way of everything, steering, bumps, panhard mount, you name it, it interferes with it. I order some 1.5" hoops from RuffStuff which should be a much cleaner solution. So if anyone wants some unwelded cobra towers from 4WU let me know.