Topic: Rancho with all pro springs

[4Runnerguy]

:help:Does anyboy know what model RS9000's I should purchase to go with a 5" all pro lift in the front(not the extra long springs but they are off set) and what size shocks for a regular superlift rear 4.5".  I know I should measure them, but I wont get to install them til next month and I want to take advantage of Rancho's sale plus I know they sag about an inch later on and I don't want to buy shocks that are too long.  If you guys are using different shocks, let me know also, because I'm sure they can cross the numbers.

Thanx

[Brandon]

Get the 9012's and you can't go wrong - never need to buy another shock that way. You will need to put new shock mounts on though..

[Brandon]

If you want the right size ones that bolt up there is a shock chart at the bottom of the bible on the pirate4x4 tech page

[4Runnerguy [OP]]

:drool:Brandon, what kind of mounts would I need to make are they very hard, I don't really want loops, I am capable of fabricating though.  Any suggestions would be appreciated and would they bolt on to the rear, you are suggesting 9012's all around right?

[Brandon]

one option is to change the orientation of your shocks to tilt inward, like this:



With a runner you'd just have to fab something that works, I don't know what kind of room you have..

or something like this:
http://www.pirate4x4.com/tech/suspension/shocks/index.html

[Brandon]

for the front, I used hoops but on my other rig I used some reciever tube and made them adjustable so I could run my short shocks until I had the $$ for the longer ones