Topic: what lit kit will fit these tires???

[toyota35bogger]

i want to put a set of 37" bogger on my toyota but i need alift kit and want to now what one to go with??  

[BLACKDOG]

what is on it right now?

[toyota35bogger [OP]]

here it is with 33" boggers i am doing the sas very soon with 5:29 front and rear locked and i am not shure of what lift to fit 37" boggers

[MidgetMike]

I'm thinkin 8" if youdon't want to cut your fenders and fire wall 

[Rockcrawlintoy]

sas that truck the IFS will not last. rears up front will move the axle forward so 5 inches of lift will take care of 37s

Drew

[kyle_22r]

dude, you have wayyyy too much lift

[lilbuddy]

I have about 9-10 inches of lift with my 37s (3inch body lift on it  ) and im goign to have to say taht i could fit 40s pretty good... Id say to do what Drew said to do. Rears up front. His truck flexes pretty good. Last sunday i saw his truck at the top of a 44"TSL and he has 37s with it


Chris

[WHITE_TRASH]

Damn, your serious about this arent you?  You can fit 37's easily right now, in all reality you have too much lift.  Im runnig 37's on my rig and Ive probobly got about 5" of lift.  I had 38" tsl's on it with under 4" and they didnt rub at all.  I lifted in not for tire clearance but for suspension travel improvments. (I needed more up travel)  With a littel bit of trimming and moving the axle forward you could easily clear 37's.

[BLACKDOG]

If you arent shy about cutting the sheetmetal, you could do it now.  My truck is IFS still, and I have 37" MTRs on it with some trimming of the fenders.  It doesnt rub at all in the rear, and the front only rubs when compressed.  I just need to trim up some small peices and it wont.   I would say SAS it too, and then worry about the height you'd need.  I want to do the SAS, but no $ no time

[Marketing]

Doing the 5" solid axle swap and modify the rear part of the fenders and you will be able to fit upto 38" tires.

http://www.marlincrawler.com/firewall.html