Topic: 85 22R

[Aaron84x4]

Hey guys, i'm lookin for a 22R from an 85 Pickup or 'Runner. 

Needs to be carbureted, doesn't need to be working--just usable as a core.  I'm a college student, so if your lookin to just get one out of the yard, or get couple bucks, let me know.

Interested in picking it up which limits me to either So.Cal(Irvine Area) or Central Valley (Bakersfield to Fresno)

THanks
Aaron-

[pyrosnow911]

i got one from an 84 4runner, bad block, crank started walking.... but im up by sf.....

[Aaron84x4 [OP]]

Thanks pyrosnow911, but i'd like it to be an 85' 

[Aaron84x4 [OP]]

bump, still looking for an 85' 22R which can be used as a core.

[Aaron84x4 [OP]]

bumpity bump

[Aaron84x4 [OP]]

...bump.  C'mon, someone has to have one thats close...

[slickrock209]

i got a 85 22r im parting out a entire 85.
http://board.marlincrawler.com/index.php?topic=46774.0

[pyrosnow911]

i got a 85 22r im parting out a entire 85.
http://board.marlincrawler.com/index.php?topic=46774.0

that is totally not an 85

[Aaron84x4 [OP]]

 

unless its had a motor transplant which you can confirm....i suspect there's a 20R under there, not 22R

[slickrock209]

that is totally not an 85

Your right 83

 

unless its had a motor transplant which you can confirm....i suspect there's a 20R under there, not 22R

  I suspect your wrong though its a 22r unless at one time someone swaped it out with a 20r. But i dont think so.

[jr9162]

I had a bone stock 85 Xtra Cab with a 22R in it. Traded the truck for a 87 SR5 Xtra Cab with 22R-TE. So, yes they did make 22R equipped trucks in 85.

[Aaron84x4 [OP]]

Sorry, Thanks for the reply, but i'm looking for an 85' 22R...not an 83' 22R. 

Thats cool though, i didn't know that they put 22R motors into 83' pickups stock.  Learn something new every day. 

[DCabTaco]

83-84 came with 22r but the blocks are slightly shorter(not interchangeable with 85+).  85-95 22r (and 22re) blocks are all interchangable. 

I know this because I kept ordering stuff for an 83(my truck was an 83), but some previous owner must have done an 85+ motor swap(just block and head)  so after trial and error I found out the engin blocks(mainly timing chain) and some heads are not interchangable.

[rednckwheelr]

have a complete motor with all the trimmings needs head gasket but still ran good before it was removed from service make offer

[rednckwheelr]

was in an 86 it is not a 22re I do know the difference

[Aaron84x4 [OP]]

I'll have to see if the 86 will suite.  22RE was for EFI, i don't have the EFI setup, so this engine could be right up my alley.  Rednckwheelr Where are you located?

[cgbemis]

If you are still looking for a motor, I've got one in San Diego for $150 including the head. I was told that the block blew a head gasket, and the owner bought a new crate motor from toyota. It's out of an 85 runner. Let me know if you are interested. Thanks.

[L.D.]

I know you didn't want to travel this far, but I do have an '86 22r complete running motor for $450. both manifolds and the carb are still on it, comp. is 150/140.
I'm in Reno

[toyotaboy]

k i read this add and got confused with what facst are what... heres some clerifacation

81-84 22r's are not the same motors as an 85-95 22r/re

85-95 22r/re's had flat topped pistons and taller deck heights

81-84 had domed pistons and different block hieghts

85-95 22(r) or an (re) motor will work for your application just swap your intake and exhaust onto the motor if you buy an efi motor and yours is a carbed everything will bolt up