Author Topic: XJ has been caged [pics] (Read 5836 times)

Ruggedjeep · « **on:** Jul 12, 2007, 11:14:48 PM »

Well after months of having it sit in the garage, finally got around to getting the cage in. Few things that will be happening to complete the cage. 1) rockers are gonna be cut out and replaced with new rails and the cage will tie into them. 2) the center halo will be getting more toob along with the rear section in the trunk 3) paint

I dont care much for appearance

nice welds

B-pillar mounts welded and bolted, you could only 2 or 3 bolts in through here

rear section

rear plates couldnt even be bolted, its right on top of the shackle mount, impossible to access

welds

Here is what i wasnt to happy about, i know pre 97 has glove compartment issues but not 97+ not sure what happened here but ill be trimming the glove so it will open

Here is a outside shot

and one of the front plates that will get tied into the uni-body

Thats all for know

:D

Duffil · « **Reply #1 on:** Jul 12, 2007, 11:20:27 PM »

Nice! $Beer Chug\'n$

iNfErNaL · « **Reply #2 on:** Jul 12, 2007, 11:36:24 PM »

Damn Rugged,that looks really good.Are you doing all the welding?,some of it looks like it's tigged,what size tubing?.Looks like 1" 1/2,maybe

Ruggedjeep · « **Reply #3 on:** Jul 12, 2007, 11:47:50 PM »

Thanks Bro! no definetly not doing the welding, the guys at http://www.fabtechwelding.com did a great job, they do some reallly custom

. You're right its all 1.5"

*** YELLER *** · « **Reply #4 on:** Jul 13, 2007, 07:26:20 AM »

Well bud if ya realy wanna do it right and all then I guess thats the way to do it

Blingn · « **Reply #5 on:** Jul 13, 2007, 11:07:44 AM »

you have seen my ghetto fab looks like you could shave the glove box to get it to open

Blingn · « **Reply #6 on:** Jul 13, 2007, 11:08:11 AM »

but dude it looks pimpin

Ruggedjeep · « **Reply #7 on:** Jul 13, 2007, 11:20:27 AM »

Ya thats the plan and thanks.

DTB · « **Reply #8 on:** Jul 13, 2007, 01:24:44 PM »

looks nice...u gonna build a sub frame for that thing? is it stiff enough to keep the body from flexing?

Ruggedjeep · « **Reply #9 on:** Jul 13, 2007, 02:01:37 PM »

well the unidoby where the cage is going to connect to is already re-enforced. Ive got a set of frame stiffners on there, With the cage tying into those, its the stiffest the unibody will get.

Ruggedjeep · « **Reply #10 on:** Jul 14, 2007, 12:07:17 AM »

Few more...

iNfErNaL · « **Reply #11 on:** Jul 14, 2007, 12:14:56 AM »

Hey Rugged,have you ever heard of a magazine called Jeep Junkie?.I had never heard of it but saw it today at Barne's & Noble and there's 3 pictures of your XJ in it at the Naxja event in BB...There's also a picture of my buddie Danny's Waggy in the same issue.

Ruggedjeep · « **Reply #12 on:** Jul 14, 2007, 12:26:19 AM »

Ya i actually write for them

The next issue will have this cage article in it...

Edit: was it BB or the rubicon ?
was it this article http://www.ruggedjeep.com/jeepjunkies.htm

*** YELLER *** · « **Reply #13 on:** Jul 15, 2007, 06:44:50 AM »

Quote from: Ruggedjeep on Jul 14, 2007, 12:26:19 AM

Ya i actually write for them

I love that Mag. wasnt it FSJ before

I havent got my last Issue could ya help a Brother out

Cage looks sweet bud keep the pics comin

Doof · « **Reply #14 on:** Jul 16, 2007, 01:52:43 AM »

very clean nice job

jimbo74 · « **Reply #15 on:** Jul 16, 2007, 02:06:31 AM »

looks good... those welds are awesome... im sure those welds will hold up even though that one plate is not bolted down... those welds look more than sufficient for them.... of course you cant tell a weld quality by looks..... but.... those welds look just that good.....

littletxjeep · « **Reply #16 on:** May 20, 2008, 07:10:13 AM »

thats a cool jeep bro nice jeep

Ruggedjeep · « **Reply #17 on:** May 27, 2008, 04:29:58 PM »

Since this thread is back from the dead, might as well update it right? well, we were back at it. Bending tube and welding. Here is what we came up with, went to a buddy house yesterday. 20+ft of DOM, a welder, a bender and all the other fun tools and this is what you get.
Some more support on the main hoop.

Some additional support all the way in the back

Then we came up with this thing. Ive decided to ditch the rigid tire carrier, i wanted the tire inside, nice and low and stout so it doesnt play.

Its gonna be nice to be able to see out the back window again.

DTB · « **Reply #18 on:** May 28, 2008, 05:49:09 AM »

Thats bad ass....nice work

skipnrocks · « **Reply #19 on:** May 28, 2008, 04:46:06 PM »

Thats a cool cage man!!!

Ruggedjeep [OP]

Ruggedjeep [OP]

Ruggedjeep [OP]

Ruggedjeep [OP]

Ruggedjeep [OP]

Ruggedjeep [OP]

Related Topics