Author Topic: Parting out 85 rock crawler (Read 4762 times)

Lizard_lips · « **on:** Jul 11, 2007, 12:32:57 PM »

85 Standard Cab. Dove tailed front end 20+" bed's rusty cab is in excellent shape. narrowed grill and uses KC daylighters as head lights. frame set up for 63's or 57" fords rear and fullwidth axle in the front. also has shaffers sliders. all glass is good and rear slider window.- $800
Toy Rears with 4" yj's and mix springs in front- $50
63" Chevy's rear. currently has dual shackles- $100
line loc for front brakes- make offer
KC daylighters for lights have 3 set- $50 per set
22 gallon ford tank fits between the frame- make offer
anything else i didn't list just ask.

The truck is complete right now you can take everything for $6000

*FFC* · « **Reply #1 on:** Jul 11, 2007, 12:40:02 PM »

Where are you located, and what gears/axles are you currently running? (complete thirds $??)

Thanks

krawler76 · « **Reply #2 on:** Jul 11, 2007, 12:48:20 PM »

looks like 3/4 ton 44 stuff

Lizard_lips · « **Reply #3 on:** Jul 11, 2007, 01:09:45 PM »

axles are dana 44 front and 14 bolt rear. I have the axles listed on a seperate post. they have 4.10's. the dana 44 has all new seals and bearing. flat top knuckles drilled and tapped with a limited slip. the rear has a detroit and the perches have been moved into toyota width.

Lizard_lips · « **Reply #4 on:** Jul 11, 2007, 01:10:18 PM »

sorry located in las vegas also

*FFC* · « **Reply #5 on:** Jul 11, 2007, 01:49:39 PM »

Thank you

Lizard_lips · « **Reply #6 on:** Jul 11, 2007, 01:51:41 PM »

hurry and buy them they would look sweet under what ever you drive. $700 for the axles.

Lizard_lips · « **Reply #7 on:** Jul 11, 2007, 01:51:55 PM »

$700 both the axles unless you want them seperate

*FFC* · « **Reply #8 on:** Jul 11, 2007, 02:02:13 PM »

Quote from: Lizard_lips on Jul 11, 2007, 01:51:41 PM

hurry and buy them they would look sweet under what ever you drive. $700 for the axles.

That they would

But I'm keepin with toy stuff.... on my isuzu

Good luck though, nice rig!

toyotaexo · « **Reply #9 on:** Jul 11, 2007, 07:11:39 PM »

how much for the half doors?

79yoda · « **Reply #10 on:** Jul 12, 2007, 08:14:56 AM »

email sent

Lizard_lips · « **Reply #11 on:** Jul 12, 2007, 12:06:39 PM »

just make an offer on the half doors. The driver door just needs the inside pannel made and the passenger door is complete except for the window. I never got around to make it into a half door.

Lizard_lips · « **Reply #12 on:** Jul 12, 2007, 12:11:25 PM »

sent you an email back

*ROKTOY* · « **Reply #13 on:** Jul 12, 2007, 02:26:56 PM »

How much for your rear driveshaft shipped to 85224?

Lizard_lips · « **Reply #14 on:** Jul 12, 2007, 02:48:31 PM »

sorry the shafts aren't for sale. I'm deciding to keep them to throw on my other rig i'm building. maybe I'm not sure.

Lizard_lips · « **Reply #15 on:** Jul 13, 2007, 11:13:46 AM »

79yoda · « **Reply #16 on:** Jul 19, 2007, 08:44:28 AM »

Ill take the fuel tank. Sent you another e mail. Let me know where you are at and I will go pick it up. Thanks

Lizard_lips · « **Reply #17 on:** Jul 22, 2007, 09:26:57 AM »

sold it complete

79crawler · « **Reply #18 on:** Jul 23, 2007, 04:46:30 PM »

what type of t case set up you running?

robrub00 · « **Reply #19 on:** Jul 23, 2007, 09:30:17 PM »

im interested in the ford tank. did you get the sender working and everything etc the pump? can you ship. im guessing you dont want to sell the sliders seperate??

Lizard_lips · « **Reply #20 on:** Jul 24, 2007, 09:10:26 AM »

Sorry I forgot to update this thread. I sold it as a whole. The tank is just with the sending unit in the tank and i used an external electric pump. I also used a pump that goes on the block for a while until i blew that motor up.

I might sell the sliders seperate. I also have some that are for an extra cab that I was going to cut down and put on. if you are intersted in them let me know

robrub00 · « **Reply #21 on:** Jul 24, 2007, 12:03:49 PM »

yeah im interested. i have a 4runner

jimbo74 · « **Reply #22 on:** Jul 24, 2007, 12:11:15 PM »

lizard, what about the xcab sliders?

Lizard_lips · « **Reply #23 on:** Jul 24, 2007, 01:31:27 PM »

i have some sliders that are from shaffers offroad the ones that are angled. just the sliders I don't have the tubes the weld to the frame. I was looking to get abotu 100 out of them. they are brand new.

rscalmo · « **Reply #24 on:** Aug 03, 2007, 01:28:04 PM »

how much for the dana 44 by itself or has it been sold??

Lizard_lips · « **Reply #25 on:** Aug 04, 2007, 09:17:24 AM »

its sold. I have some xtra cab sliders for sale also. $100

Lizard_lips [OP]

Lizard_lips [OP]

Lizard_lips [OP]

Lizard_lips [OP]

Lizard_lips [OP]

Lizard_lips [OP]

Lizard_lips [OP]

Lizard_lips [OP]

Lizard_lips [OP]

Lizard_lips [OP]

Lizard_lips [OP]

Lizard_lips [OP]

Related Topics