Topic: Project Little Chango

[rEdnECkwHeE1eR]

Got my 82 plans are in this order
Get it running
rears up front w/AAL
2wd rears with added leafs(temp) 4 link later
Bright ass paint job
Cheap cross over
Smurfields w/ welded front till I find a locker
Dual cases w/ flat belly
35s-36s
bed bob to short bed length
square front Dshaft
pipe rear shaft
try to make a twin stick
1/2 doors with canvas covers

later plans
move front axle forward 4"(plus 3" with rears up front)
move rear axle forward 10-12"(longbed)
38s
4.7s
coil front

Well that alL I can think off right now, once it gets home tomarrow I will take a bunch oh pics  

[rEdnECkwHeE1eR [OP]]

I did a major mod today :bull crap:









What a cool steering wheel....











 NOT

[rEdnECkwHeE1eR [OP]]

Much better

I could clean it allot more this was just water

[rEdnECkwHeE1eR [OP]]

Ok, 85 dash in 82 8)

tools you need

[rEdnECkwHeE1eR [OP]]

startin to tear out

[rEdnECkwHeE1eR [OP]]

Ok all my pics are the same size but it will not let me attach some but will allow others

This piece was the big PITA of taking appart the dash(next to like 15 wasps ) I found that one I poped out the vents it was allot easyer then trying to take the top piece on the pass side out first.


Got the top piece


got the dash out, I think later I will put in the ac, yes ac :king:but for now I will just keep the 82 air and if I can heater

[rEdnECkwHeE1eR [OP]]

Annnnndd, this is how I left it Im   on this one, probally gonna end up making some butch ass brakets of well if you cant see them from the outside

[rEdnECkwHeE1eR [OP]]

3rd try

ok  Before pic messed up  

Ill try agian

before (hopefully it will be better afterwards  threw the old steering wheel in for good measure

[rEdnECkwHeE1eR [OP]]

see here http://board.marlincrawler.com/index.php?board=24;action=display;threadid=1977;start=0#lastPost