Aloha from Hawaii forum!
So my truck was running fine except the battery was leaking its fluid so I went to replace it. Went to Walmart and bought an equivalent battery. Put it in the truck and it wouldn't start, and I wasn't getting good connects so I replaced the terminals. After that, still wouldn't crank over. The battery was drained so I got a jump and I think the person who helped put on or removed the cables in the wrong order and perhaps fried something. At that time, I could still hear my fuel pump working and engaging when the key was turned to ACC but not anymore. I got a tow home and I replaced the spark plugs, distributor cap, rotor, plug wires, and today I replaced the MSD SS blaster coil and even the COR fuse and it still won't crank over. I've tried spraying starter fluid down the weber and nothing. All the fuses tested out good. Truck was fine until I went to replace the battery so something must have happened to the electrical along the way, but I'm not even hearing the fuel pump turn on at this point. Any ideas? My email is matthansrecording@yahoo.com. I really need help getting this running ASAP. Mahalo!