Topic: triple stick? bench seat?

[red450r]

im looking to put twin cases in my truck, i know very little about them and want to keep my bench seat (lil one on the way), would a triple stick allow me to do that, and what adapter do i need? its a 94 with a 22re and i know that my donor case is a 21 spline

[yota4x4sc]

u just need a 21 spline adaptor... and i keep my factory bench seat in..my dual shifter cleared nicely

[yota4x4sc]

my setup 

[red450r [OP]]

what did you do for the x member and i seen on marlin that it like 3 different adapters

[yota4x4sc]

i got the all pro skidplate w/ driveline ebrake..super nice setup..... but u just proly want the regular adaptor..the other ones billet and ones rotated 10 degrees and one is normal

[red450r [OP]]

nice shifter boots by the way

[Snowtoy]

W/a bench seat you might check out this set-up http://www.pirate4x4.com/forum/showthread.php?t=916481, the 3 shifters are located on the front case, w/levers that operate the 4H and 4L functions of the second case.

I modified the front shifter, so it could be located next to the rear case case shifter, for a little cleaner look.


The shifter only has to move forward and back, not to the right and as well, so I don't know how that extension would effect the amount of space the shifter would have to move to engage 4L, 4H wouldn't be a problem.  A short through shifter kit on the second case might reduce the movement enough to not have the shifter end up in a position that gets in the way.

[fade]

Nice integra seats.

[Tofudude]

Good gosh snowtoy...your interior is beautiful 

[Yota Rolla]

Nice integra seats.

not integra seats bud. .
heres a couple pics of my setup nowhere close to finished still need to do some cutting on the floor but as you can see the twin sticks(front range) clear the 60/40 split bench nicely. .seats are out of a 2000 Tacoma and there in my 1st gen pickup with mounts i made

[Snowtoy]

Nice integra seats.

The seats are from a '94 Supra, with the exception of raising the rear mounts 1.5"(to match the oem slope of the truck seats), they bolt right in.

Good gosh snowtoy...your interior is beautiful 

You should have seen it when I drug it home.  Before I got it, it had spent the last 12yrs of its life as a winery truck, and it looked like the PO hauled more garbage, manure, and dirt inside the cab then the bed.  It took a good 12 hours of cleaning to get the smell out, fortunately everything but the seats were re-usable.