Author Topic: 2.7l 3rz knocking!!!  (Read 2275 times)

0 Members and 1 Guest are viewing this topic.

<MIKE>

  • Offline Crawler Guru
  • ****
  • Turtle Points: 41
  • Male Posts: 618
  • Member since Dec '09
  • Swap, Lock, and Rock it
    • View Profile
    • Buy me a beer
2.7l 3rz knocking!!!
« on: May 16, 2010, 03:48:55 PM »
flopped my truck on its side this weekend. after i rolled it up right i pulled the plugs and cranked the oil out. i let it settle and replaced the missing oil and fired it up. it has a pretty decent know coming from it now. any ideas what this could be? i didn't flop over too hard? can someone point me in the right direction to fix this. thanks     :beer:
1987 4runner
Dual cases, 2.28-4.7
Dana 60 Rear; Danna 44 front; 5.89’s
249:1

bigarms23

  • Offline The 2.5K Group
  • ****
  • Turtle Points: 111
  • Male Posts: 2,897
  • Member since Jun '07
    • View Profile
Re: 2.7l 3rz knocking!!!
« Reply #1 on: May 16, 2010, 06:36:41 PM »
are all your lifters still good
88 4runner 92 cpi duals 37 radial rockers and 4.8 coming soon

<MIKE> [OP]

  • Offline Crawler Guru
  • ****
  • Turtle Points: 41
  • Male Posts: 618
  • Member since Dec '09
  • Swap, Lock, and Rock it
    • View Profile
    • Buy me a beer
Re: 2.7l 3rz knocking!!!
« Reply #2 on: May 16, 2010, 06:47:53 PM »
ya know i haven't even pulled the cover off yet. could flopping over cause one to break or bend?
1987 4runner
Dual cases, 2.28-4.7
Dana 60 Rear; Danna 44 front; 5.89’s
249:1

muddytaco

  • Offline Rock Master
  • ***
  • Turtle Points: -2
  • Male Posts: 228
  • Member since Oct '08
    • View Profile
Re: 2.7l 3rz knocking!!!
« Reply #3 on: May 16, 2010, 07:05:13 PM »
i rolled my taco on its side and got kinda knocked out for a little bit and it just kept running, didnt leak at all though, and it was all the way on its side
95 tacoma 5" revtek/bilstein detroit locked 9" with drilled and slotted rotors front and back, 8000# mile marker winch, 16" crager crawlers, too much other crap to mention
96 t100 2wd (soon to be sasd i hope) - dead
85 efi 4runner
01 sequoia

<MIKE> [OP]

  • Offline Crawler Guru
  • ****
  • Turtle Points: 41
  • Male Posts: 618
  • Member since Dec '09
  • Swap, Lock, and Rock it
    • View Profile
    • Buy me a beer
Re: 2.7l 3rz knocking!!!
« Reply #4 on: May 16, 2010, 09:24:43 PM »
ya mine didnt leak alot either. just a lot of white smoke coming out of the exhaust and that knocking. i already cleaned spark plugs just wondering what else could go wrong from laying it on its side. like i said it wasnt even that bad of a flop it was so slow i had time to try and drive out of it.
1987 4runner
Dual cases, 2.28-4.7
Dana 60 Rear; Danna 44 front; 5.89’s
249:1

muddytaco

  • Offline Rock Master
  • ***
  • Turtle Points: -2
  • Male Posts: 228
  • Member since Oct '08
    • View Profile
Re: 2.7l 3rz knocking!!!
« Reply #5 on: May 16, 2010, 09:28:54 PM »
sorry to hear it dude hope its nothing major! but it sounds like maybe it didnt have enough oil in it for the pump to pick up when its on its side, i didnt think about it but i run big filters and extra oil
95 tacoma 5" revtek/bilstein detroit locked 9" with drilled and slotted rotors front and back, 8000# mile marker winch, 16" crager crawlers, too much other crap to mention
96 t100 2wd (soon to be sasd i hope) - dead
85 efi 4runner
01 sequoia

BUDDERS

  • Offline The 1K Club
  • *
  • Turtle Points: 15
  • Male Posts: 1,335
  • Member since Jul '05
  • Crawling with Marlin
    • View Profile
Re: 2.7l 3rz knocking!!!
« Reply #6 on: May 17, 2010, 10:18:20 AM »
You can run a 4.7L tundra filer and add more oil.  I've done that...
"A friend will help you move.  A real friend will help you move a body."

"They call it PMS because Mad Cow Disease was already taken"

"Hopefully, if I crap in a gopher hole, one doesn't try and nibble at my taint"  - my freind Fat Tony

"I once read somewhere that drinking causes violence, so I quit reading"

<MIKE> [OP]

  • Offline Crawler Guru
  • ****
  • Turtle Points: 41
  • Male Posts: 618
  • Member since Dec '09
  • Swap, Lock, and Rock it
    • View Profile
    • Buy me a beer
Re: 2.7l 3rz knocking!!!
« Reply #7 on: May 17, 2010, 10:19:45 AM »
that won't fix the knocking though. but a good idea for the future.
1987 4runner
Dual cases, 2.28-4.7
Dana 60 Rear; Danna 44 front; 5.89’s
249:1

muddytaco

  • Offline Rock Master
  • ***
  • Turtle Points: -2
  • Male Posts: 228
  • Member since Oct '08
    • View Profile
Re: 2.7l 3rz knocking!!!
« Reply #8 on: May 17, 2010, 07:09:04 PM »
You can run a 4.7L tundra filer and add more oil.  I've done that...
i know its off the subject but i run a big ford filter F1A the really big one

is it knocking for sure or is it tapping from the head?
95 tacoma 5" revtek/bilstein detroit locked 9" with drilled and slotted rotors front and back, 8000# mile marker winch, 16" crager crawlers, too much other crap to mention
96 t100 2wd (soon to be sasd i hope) - dead
85 efi 4runner
01 sequoia

<MIKE> [OP]

  • Offline Crawler Guru
  • ****
  • Turtle Points: 41
  • Male Posts: 618
  • Member since Dec '09
  • Swap, Lock, and Rock it
    • View Profile
    • Buy me a beer
Re: 2.7l 3rz knocking!!!
« Reply #9 on: May 17, 2010, 08:37:08 PM »
i don't really know i guess. it sounds like a knock. maybe i better let someone else listen to it.
1987 4runner
Dual cases, 2.28-4.7
Dana 60 Rear; Danna 44 front; 5.89’s
249:1

 
 
 
 
 

Related Topics

10 Replies
2548 Views
Last post Sep 29, 2004, 08:18:23 PM
by Fireimp141
7 Replies
2977 Views
Last post Oct 16, 2004, 01:51:20 PM
by ToyDuck
4 Replies
1213 Views
Last post Sep 01, 2010, 07:54:23 PM
by rdrck
8 Replies
2158 Views
Last post Jan 28, 2012, 12:31:26 PM
by cali4runner
5 Replies
1385 Views
Last post Dec 17, 2012, 11:34:09 PM
by Rocksurfer