Author Topic: 3.4 knock sensor (Read 1649 times)

toyofan7987 · « **on:** Feb 18, 2010, 01:14:13 PM »

came acrossed a great deal on another t100 but it wont pass in spection due to a bad knock sensor. where is the knock sensor on a 3.4?

TacoStewie · « **Reply #1 on:** Feb 18, 2010, 05:16:31 PM »

under the intake manifold at the back of the block

toyofan7987 · « **Reply #2 on:** Feb 18, 2010, 05:23:52 PM »

so the intakes gotta come off?

TacoStewie · « **Reply #3 on:** Feb 18, 2010, 06:39:51 PM »

toyofan7987 · « **Reply #4 on:** Feb 18, 2010, 07:27:05 PM »

from what i remeber from looking at it earlyer its an easy inteake to remove?

ROKTOY829 · « **Reply #5 on:** Feb 18, 2010, 07:27:55 PM »

I would suggest replacing the sub harness just as an cya. Pulling the manifold isn't hard but it would suck do have to replace it later. Also there is two knock sensors on the 3.4

gnob · « **Reply #6 on:** Feb 18, 2010, 08:15:27 PM »

more likely than no, the harness is bad, not the sensor.

Author Topic: 3.4 knock sensor (Read 1649 times)

toyofan7987

3.4 knock sensor

TacoStewie

Re: 3.4 knock sensor

toyofan7987 [OP]

Re: 3.4 knock sensor

TacoStewie

Re: 3.4 knock sensor

toyofan7987 [OP]

Re: 3.4 knock sensor

ROKTOY829

Re: 3.4 knock sensor

gnob

Re: 3.4 knock sensor

Related Topics


	Author Topic: 3.4 knock sensor (Read 1649 times) 0 Members and 1 Guest are viewing this topic. toyofan7987 Rock Crawl'n Turtle Points: 0 Posts: 124 Member since Jan '07 yoter boy till i die 3.4 knock sensor « on: Feb 18, 2010, 01:14:13 PM » came acrossed a great deal on another t100 but it wont pass in spection due to a bad knock sensor. where is the knock sensor on a 3.4? Logged TacoStewie 4WD Legend Turtle Points: 4 Posts: 816 Member since May '06 Re: 3.4 knock sensor « Reply #1 on: Feb 18, 2010, 05:16:31 PM » under the intake manifold at the back of the block Logged 4THEWKN toyofan7987 [OP] Rock Crawl'n Turtle Points: 0 Posts: 124 Member since Jan '07 yoter boy till i die Re: 3.4 knock sensor « Reply #2 on: Feb 18, 2010, 05:23:52 PM » so the intakes gotta come off? Logged TacoStewie 4WD Legend Turtle Points: 4 Posts: 816 Member since May '06 Re: 3.4 knock sensor « Reply #3 on: Feb 18, 2010, 06:39:51 PM » yep Logged 4THEWKN toyofan7987 [OP] Rock Crawl'n Turtle Points: 0 Posts: 124 Member since Jan '07 yoter boy till i die Re: 3.4 knock sensor « Reply #4 on: Feb 18, 2010, 07:27:05 PM » from what i remeber from looking at it earlyer its an easy inteake to remove? Logged ROKTOY829 Rock Master Turtle Points: 45 Posts: 191 Member since Feb '08 Re: 3.4 knock sensor « Reply #5 on: Feb 18, 2010, 07:27:55 PM » I would suggest replacing the sub harness just as an cya. Pulling the manifold isn't hard but it would suck do have to replace it later. Also there is two knock sensors on the 3.4 Logged gnob 4WD Legend Turtle Points: 486 Posts: 810 Member since May '02 Re: 3.4 knock sensor « Reply #6 on: Feb 18, 2010, 08:15:27 PM » more likely than no, the harness is bad, not the sensor. Logged hold this. . .