0 Members and 1 Guest are viewing this topic.
are those 10* clockable?thanks for the info!
There are several degrees you can clock it at. I don't remember the numbers but I think it will go up to 15* one way and 10* the other in 5* increments. The info should be on the inch worm site. They call it a tacoma adapter but it will work with any 340f or late model r150 as far as I know.
Awesome!!!! would this adaptor work on a 91 R150F? or you mean late model as in 95+?
Their web site makes it sound like it would work but I'm not 100% sure. Give them a call before you order they are good guys and have excellent customer service.
So basically.....I have a 22re/4speed/dual toy tcase setup.I can get a 340F and an adaptor from marlin or inchworm.(will either of these work with 21 spline inputs) and keep my dual toy cases.I can get a bellhousing from a 340F from behind a 22re and use that bellhousing and an 21 spline aw4 transmission from a pre 91 cherokee and an adaptor from AA and then get a dana 300 or atlasII.I like the sound of getting the 340F. What years/vehicles should I be searching for? Are these transmissions stand alone or will I need anything from under the hood or to wire anything? How much longer than the manual is it?
Can i just get a 340H?
to put a gear case behind a A340 Auto... you CAN NOT use a the A340H, the auto tcase DOES NOT come off.
Started by wood General 4WD Discussion
Started by dj Project Research and Build-Ups
Started by toyotasarebetter Toyota Pickup/4Runner Tech 1979-95
Started by ruegs21 New Member Check-In!
Started by toysfreak Transmission/Clutch