Pages: [1]   Go Down
 
Print
 

Author Topic: Long Spline Drive Shaft parts  (Read 3241 times)

0 Members and 1 Guest are viewing this topic.

86turboyota

  • Trade Count: (0)
  • Offline The 1K Club
  • *
  • Turtle Points: 0
  • Male Posts: 1,079
    • Member since Jul '05
  • Crawling with Marlin
    • View Profile
Long Spline Drive Shaft parts
« on: Apr 26, 2009, 02:27:32 PM »
This is whats left of my old driveshaft, its a marlin crawler 8" travel long spline that IS bent, the splines themselves are what is bent, although they still slide perfectly and i never noticed any difference when i used 4wheel drive at low speeds.  I bent this last summer and continued to use it on a few more trips and a snow run, so it functioned just fine for all of that, i only replaced because i went with a longer travel spline.  These sell new for $180, plus mine has some tube still in that you might use.   Its ~25.5" compressed and 32" extended.   This would work great on a low speed crawler, but i sure wouldn't recommend it for highway use.
I want $90 OBO
Located in Santa Rosa Ca currently, but ill be back home in groveland ca in a month.
post up here or call Andy @ 209 770 1475




this shows how bent it is




« Last Edit: Apr 26, 2009, 02:50:16 PM by 86turboyota »
Report to moderator   Logged
My Build 1986 4runner SAS 36s etc
http://board.marlincrawler.com/index.php?topic=22625.0

"Later, I learned that even though I engage 4WD my hubs are not automatically locking? Something about manual locking hubs I think. What's manual mean? I need to read a manual to lock them? lol  So I found these neat autolocking hubs and installed them. Sometimes they dont stay locked while I am backing up, but that's fine because I dont have a backup camera to see where Im going (like our RV) so I just simply dont ever back up"- BigMike

86turboyota [OP]

  • Trade Count: (0)
  • Offline The 1K Club
  • *
  • Turtle Points: 0
  • Male Posts: 1,079
    • Member since Jul '05
  • Crawling with Marlin
    • View Profile
Re: Long Spline Drive Shaft parts
« Reply #1 on: Apr 27, 2009, 08:13:57 AM »
btt
Report to moderator   Logged
My Build 1986 4runner SAS 36s etc
http://board.marlincrawler.com/index.php?topic=22625.0

"Later, I learned that even though I engage 4WD my hubs are not automatically locking? Something about manual locking hubs I think. What's manual mean? I need to read a manual to lock them? lol  So I found these neat autolocking hubs and installed them. Sometimes they dont stay locked while I am backing up, but that's fine because I dont have a backup camera to see where Im going (like our RV) so I just simply dont ever back up"- BigMike

86turboyota [OP]

  • Trade Count: (0)
  • Offline The 1K Club
  • *
  • Turtle Points: 0
  • Male Posts: 1,079
    • Member since Jul '05
  • Crawling with Marlin
    • View Profile
Re: Long Spline Drive Shaft parts
« Reply #2 on: Apr 28, 2009, 08:15:58 AM »
btt
Report to moderator   Logged
My Build 1986 4runner SAS 36s etc
http://board.marlincrawler.com/index.php?topic=22625.0

"Later, I learned that even though I engage 4WD my hubs are not automatically locking? Something about manual locking hubs I think. What's manual mean? I need to read a manual to lock them? lol  So I found these neat autolocking hubs and installed them. Sometimes they dont stay locked while I am backing up, but that's fine because I dont have a backup camera to see where Im going (like our RV) so I just simply dont ever back up"- BigMike

86turboyota [OP]

  • Trade Count: (0)
  • Offline The 1K Club
  • *
  • Turtle Points: 0
  • Male Posts: 1,079
    • Member since Jul '05
  • Crawling with Marlin
    • View Profile
Re: Long Spline Drive Shaft parts
« Reply #3 on: Apr 29, 2009, 11:30:33 PM »
btt
Report to moderator   Logged
My Build 1986 4runner SAS 36s etc
http://board.marlincrawler.com/index.php?topic=22625.0

"Later, I learned that even though I engage 4WD my hubs are not automatically locking? Something about manual locking hubs I think. What's manual mean? I need to read a manual to lock them? lol  So I found these neat autolocking hubs and installed them. Sometimes they dont stay locked while I am backing up, but that's fine because I dont have a backup camera to see where Im going (like our RV) so I just simply dont ever back up"- BigMike

lifted_drifter

  • Trade Count: (0)
  • Offline Rock Master
  • ***
  • Turtle Points: 0
  • Male Posts: 200
    • Member since Feb '09
    • View Profile
Re: Long Spline Drive Shaft parts
« Reply #4 on: Apr 30, 2009, 10:20:57 PM »
how much would the shipping be to 98604
Report to moderator   Logged

86turboyota [OP]

  • Trade Count: (0)
  • Offline The 1K Club
  • *
  • Turtle Points: 0
  • Male Posts: 1,079
    • Member since Jul '05
  • Crawling with Marlin
    • View Profile
Re: Long Spline Drive Shaft parts
« Reply #5 on: Apr 30, 2009, 11:00:58 PM »
ill see what i can find out about shipping it, but id rather not.
Report to moderator   Logged
My Build 1986 4runner SAS 36s etc
http://board.marlincrawler.com/index.php?topic=22625.0

"Later, I learned that even though I engage 4WD my hubs are not automatically locking? Something about manual locking hubs I think. What's manual mean? I need to read a manual to lock them? lol  So I found these neat autolocking hubs and installed them. Sometimes they dont stay locked while I am backing up, but that's fine because I dont have a backup camera to see where Im going (like our RV) so I just simply dont ever back up"- BigMike

Jud

  • Scumbaggin
  • Trade Count: (0)
  • Offline Silver Turtle Award
  • *
  • Turtle Points: -261
  • Male Posts: 3,067
    • Member since Oct '05
  • Gettin it since 1990
    • View Profile
Re: Long Spline Drive Shaft parts
« Reply #6 on: May 01, 2009, 03:25:16 AM »
This has nothing to do with this thread but I have the same one and it bent just like yours.
Report to moderator   Logged
One Ton Single Cab  - http://board.marlincrawler.com/index.php?topic=48229

"bout tree fiddy"

86turboyota [OP]

  • Trade Count: (0)
  • Offline The 1K Club
  • *
  • Turtle Points: 0
  • Male Posts: 1,079
    • Member since Jul '05
  • Crawling with Marlin
    • View Profile
Re: Long Spline Drive Shaft parts
« Reply #7 on: May 03, 2009, 02:54:18 PM »
btt
Report to moderator   Logged
My Build 1986 4runner SAS 36s etc
http://board.marlincrawler.com/index.php?topic=22625.0

"Later, I learned that even though I engage 4WD my hubs are not automatically locking? Something about manual locking hubs I think. What's manual mean? I need to read a manual to lock them? lol  So I found these neat autolocking hubs and installed them. Sometimes they dont stay locked while I am backing up, but that's fine because I dont have a backup camera to see where Im going (like our RV) so I just simply dont ever back up"- BigMike

86turboyota [OP]

  • Trade Count: (0)
  • Offline The 1K Club
  • *
  • Turtle Points: 0
  • Male Posts: 1,079
    • Member since Jul '05
  • Crawling with Marlin
    • View Profile
Re: Long Spline Drive Shaft parts
« Reply #8 on: May 05, 2009, 12:30:05 PM »
btt
Report to moderator   Logged
My Build 1986 4runner SAS 36s etc
http://board.marlincrawler.com/index.php?topic=22625.0

"Later, I learned that even though I engage 4WD my hubs are not automatically locking? Something about manual locking hubs I think. What's manual mean? I need to read a manual to lock them? lol  So I found these neat autolocking hubs and installed them. Sometimes they dont stay locked while I am backing up, but that's fine because I dont have a backup camera to see where Im going (like our RV) so I just simply dont ever back up"- BigMike

86turboyota [OP]

  • Trade Count: (0)
  • Offline The 1K Club
  • *
  • Turtle Points: 0
  • Male Posts: 1,079
    • Member since Jul '05
  • Crawling with Marlin
    • View Profile
Re: Long Spline Drive Shaft parts
« Reply #9 on: May 06, 2009, 08:36:02 AM »
btt
« Last Edit: May 08, 2009, 10:54:01 AM by 86turboyota »
Report to moderator   Logged
My Build 1986 4runner SAS 36s etc
http://board.marlincrawler.com/index.php?topic=22625.0

"Later, I learned that even though I engage 4WD my hubs are not automatically locking? Something about manual locking hubs I think. What's manual mean? I need to read a manual to lock them? lol  So I found these neat autolocking hubs and installed them. Sometimes they dont stay locked while I am backing up, but that's fine because I dont have a backup camera to see where Im going (like our RV) so I just simply dont ever back up"- BigMike

86turboyota [OP]

  • Trade Count: (0)
  • Offline The 1K Club
  • *
  • Turtle Points: 0
  • Male Posts: 1,079
    • Member since Jul '05
  • Crawling with Marlin
    • View Profile
Re: Long Spline Drive Shaft parts
« Reply #10 on: May 08, 2009, 10:53:49 AM »
btt
Report to moderator   Logged
My Build 1986 4runner SAS 36s etc
http://board.marlincrawler.com/index.php?topic=22625.0

"Later, I learned that even though I engage 4WD my hubs are not automatically locking? Something about manual locking hubs I think. What's manual mean? I need to read a manual to lock them? lol  So I found these neat autolocking hubs and installed them. Sometimes they dont stay locked while I am backing up, but that's fine because I dont have a backup camera to see where Im going (like our RV) so I just simply dont ever back up"- BigMike

superyota

  • Prestige Worldwide
  • Trade Count: (+2)
  • Offline Silver Turtle Award
  • *
  • Turtle Points: 71
  • Male Posts: 3,362
    • Member since Oct '05
  • what happened?
    • View Profile
    • Placer County Crawlers
Re: Long Spline Drive Shaft parts
« Reply #11 on: May 08, 2009, 02:03:08 PM »
pm sent
Report to moderator   Logged
ABD Motorsports
#4475

If you can't convince them, confuse them.
Placer County Crawlers - President 2011-2016
www.placercountycrawlers.com

Rubicon Trail Foundation - Property Committee member
Friends of Fordyce - Board Member
KK6QDW

86turboyota [OP]

  • Trade Count: (0)
  • Offline The 1K Club
  • *
  • Turtle Points: 0
  • Male Posts: 1,079
    • Member since Jul '05
  • Crawling with Marlin
    • View Profile
Re: Long Spline Drive Shaft parts
« Reply #12 on: May 08, 2009, 05:27:00 PM »
pm replied
Report to moderator   Logged
My Build 1986 4runner SAS 36s etc
http://board.marlincrawler.com/index.php?topic=22625.0

"Later, I learned that even though I engage 4WD my hubs are not automatically locking? Something about manual locking hubs I think. What's manual mean? I need to read a manual to lock them? lol  So I found these neat autolocking hubs and installed them. Sometimes they dont stay locked while I am backing up, but that's fine because I dont have a backup camera to see where Im going (like our RV) so I just simply dont ever back up"- BigMike

86turboyota [OP]

  • Trade Count: (0)
  • Offline The 1K Club
  • *
  • Turtle Points: 0
  • Male Posts: 1,079
    • Member since Jul '05
  • Crawling with Marlin
    • View Profile
Re: Long Spline Drive Shaft parts
« Reply #13 on: May 10, 2009, 06:56:06 PM »
btt
Report to moderator   Logged
My Build 1986 4runner SAS 36s etc
http://board.marlincrawler.com/index.php?topic=22625.0

"Later, I learned that even though I engage 4WD my hubs are not automatically locking? Something about manual locking hubs I think. What's manual mean? I need to read a manual to lock them? lol  So I found these neat autolocking hubs and installed them. Sometimes they dont stay locked while I am backing up, but that's fine because I dont have a backup camera to see where Im going (like our RV) so I just simply dont ever back up"- BigMike

wildchild1066

  • Trade Count: (0)
  • Offline Rock Master
  • ***
  • Turtle Points: 0
  • Posts: 237
    • Member since Jul '05
  • i like cold bud and deep mud
    • View Profile
Re: Long Spline Drive Shaft parts
« Reply #14 on: May 12, 2009, 11:47:48 AM »
50.00 bucks  shipped to jersey ?
Report to moderator   Logged
UNLEASHED IN THE EAST

86turboyota [OP]

  • Trade Count: (0)
  • Offline The 1K Club
  • *
  • Turtle Points: 0
  • Male Posts: 1,079
    • Member since Jul '05
  • Crawling with Marlin
    • View Profile
Re: Long Spline Drive Shaft parts
« Reply #15 on: May 12, 2009, 08:02:58 PM »
pmed you
Report to moderator   Logged
My Build 1986 4runner SAS 36s etc
http://board.marlincrawler.com/index.php?topic=22625.0

"Later, I learned that even though I engage 4WD my hubs are not automatically locking? Something about manual locking hubs I think. What's manual mean? I need to read a manual to lock them? lol  So I found these neat autolocking hubs and installed them. Sometimes they dont stay locked while I am backing up, but that's fine because I dont have a backup camera to see where Im going (like our RV) so I just simply dont ever back up"- BigMike
Pages: [1]   Go Up
 
Print
 
 
 
 

Related Topics
9 Replies
3262 Views 		Last post Feb 27, 2007, 04:35:54 PM
by Willy Mammoth
3 Replies
1085 Views 		Last post Nov 21, 2007, 01:36:44 PM
by eric hohlfelder
0 Replies
713 Views 		Last post Oct 20, 2011, 11:23:43 AM
by 4runner freak
0 Replies
580 Views 		Last post Jun 06, 2013, 08:56:53 PM
by rockymtn89
6 Replies
1540 Views 		Last post Sep 20, 2019, 07:16:03 PM
by Goodtimeswithbuds