Topic: chevy alternator install

[bhigdon101]

want to put a chevy one wire alt. on my 22r..

has any one got pics of this done..
i have searched and got info on this but no pics
and if you have a easy way of doing it like to here that too...

any info would be great...


thanks brian higdon... 

[Nothingface5384]

i got one on my 22re, cs130 style(4 prong), and got the 22re/chevy brackets...cant reember where at the moment..

you only need to hook up 2 out of the four, stock 22re alt belt works with the new brackets and GM alt

good right up below
http://www.toyotaoffroad.com/Articles/Projects/chevy_alt/chevy_alt.htm

[Nothingface5384]

i beleive this is the guys email that i bought the gm to 22re alt brackets
aaron518@charter.net

[bhigdon101 [OP]]

anyone else got any info....
maybe a pic..

  thanks brian higdon..

[boggerunner]

im thinkin of going with a 160 amp mr2 alt.  keeping it all yota.

[bhigdon101 [OP]]

im thinkin of going with a 160 amp mr2 alt.  keeping it all yota.

i am going to rip all wires out of the whole truck and rewire with little as possible..
just the got to have wires.... no bs no spiderwebs under the hood or dash....
this is just a trail rig, no switch,just a switch panel form 12 volt guy with the push button
resets all nice and neat..

         but that is a good idea.. if trying to keep it yota....
thanks ...    brian higdon. 

[Hawk Thor]

The CS-130/CS-130D also gives you the chance to throw half of the underhood electrical stuff in the trash.

[bhigdon101 [OP]]

The CS-130/CS-130D also gives you the chance to throw half of the underhood electrical stuff in the trash.

yes this is what i thought too...
but how do you mount the alt.
does any one sell a bracket kit... i can wire it up..
just not sure how to mount it yet...
brian higdon...

[Hawk Thor]

The mounting tabs on the GM alternators and the Denso alternators are very similar. You´ll need to shim the GM´s lower tab since its thinner than the Denso tab.

Then drill 2 holes in some flat stock and put it between the upper mount and the upper tab on the GM alt. The lenght of the flat stock depends on your belts and clearance but don´t be surprised if you need to find a new belt to fit.

I think you can use the Toyota pulley on the GM alt.

[joey0712]

http://www.tinbenders.org/forum/showthread.php?t=3038

[Nothingface5384]

yep, that's the same kit i got...i already listed the guys email many posts above...

[bhigdon101 [OP]]

thanks guy's..
i just needed to look at what im going to buy...
that is it .....
brian higdon...

[joey0712]

His bracket is really nice and super strong.

[4RunnerChevy]

Chevy 105 amp= $65
Savings= priceless

[OOPS]

Here is a thread that I did on putting a 160 amp Powermaster on my 3.0 V-6. Embedded in the thread is a link for putting one on a 22r.

http://www.pirate4x4.com/forum/showthread.php?t=458156&highlight=OOP%27S

[kiyul4130]

pm sluice box hero on here. he did it.

[mudmaster]

Will that kit work on A 20R??