Topic: need alot of help

[newbe94]

ok i have a rci fuel cell and I'm wondering if there is anyway to hook up the stock fuel gauge or do i have to buy another one

also i have fox 2.0 air shox how much oil can i put in

thanks a lot

[Boosted]

ok i have a rci fuel cell and I'm wondering if there is anyway to hook up the stock fuel gauge or do i have to buy another one

thanks a lot

Yes you can use the stock gauge.  Depending on the depth of your fuel cell, you might be able to mount the stock sending unit to the top of it.  I have an adjustable VDO sending unit on my RCI aluminum fuel cell and it works great. 

[newbe94 [OP]]

but can i use the stock wires to the cluster or will i need to buy something

[Boosted]

but can i use the stock wires to the cluster or will i need to buy something

Yes you can use the stock wires.

[newbe94 [OP]]

but i would have to use the stock sending unit or will the rci one work. if the rci one works how do i wire what wire goes were. oh i have the 15 gallon tank

thanks

[Boosted]

I didnt realize you got the fuel cell with sending unit....  That sending unit works from 0-90 ohms (Chevy style) and will not work accurately with the stock gauge.  You will need to use an after market gauge or replace the sending unit with either a stock one or an aftermarket one thats adjustable.

[newbe94 [OP]]

ok thanks but do you know if the stock one will fit in the rci tank

[Boosted]

ok thanks but do you know if the stock one will fit in the rci tank

Not 100% positive, but I think it will.  You should take the stock one off and measure how tall the whole assembly is.  You may need to modify the mounting flange a little.  Before I went with the aftermarket sending unit, I actually considered using the stock one and it looked like it would work.

Hope this helps....

[newbe94 [OP]]

thanks alot that helps alot