Author Topic: 86 4runner whole or parts (Read 1755 times)

TXSS · « **on:** Mar 28, 2008, 08:40:43 AM »

Truck is gone to the crusher.
I kept the IFS front CVs to Hubs.
$100 for the IFS steering box, or $160 for the complete power steering setup....brackets, hoses, pump, and box.
$200 for the rear axle.
make me on offer on the topper and rollbar and anything else on the truck.

located in Amarillo TX 79107

87SR5 · « **Reply #1 on:** Mar 31, 2008, 12:02:42 AM »

How much for IFS hubs to ship to CA?

TXSS · « **Reply #2 on:** Mar 31, 2008, 07:03:14 AM »

You wanting the lockout hub or the whole hub and rotor?

TXSS · « **Reply #3 on:** Apr 04, 2008, 01:07:40 PM »

ttt, make me and offer on this stuff.

davidr34 · « **Reply #4 on:** Apr 06, 2008, 03:12:21 PM »

could you just chop the rear for me i need tail gate tail light and all that metal stuff

TXSS · « **Reply #5 on:** Apr 06, 2008, 06:56:22 PM »

Were are you at? I am not sure how to ship something that large.

davidr34 · « **Reply #6 on:** Apr 06, 2008, 09:37:58 PM »

im in california. ups ground should be pretty i just need the back foot maybe a little. is it in good shape?

TXSS · « **Reply #7 on:** Apr 07, 2008, 07:36:40 AM »

You need the tail gate as well? If the truck doesn't sell in the next week or so I can probably help you out. I will also have to see if they are in good shape.

Glen1978 · « **Reply #8 on:** Apr 07, 2008, 10:18:35 AM »

I need the pedals and bracket, brake MC/booster and clutch MC. Shipped over to East Texas....75783. That is of course if the brake stuff is in good condition. Thanks

TXSS · « **Reply #9 on:** Apr 07, 2008, 03:06:40 PM »

seemed all to be working fine when I drove the truck on the trailer.

TXSS · « **Reply #10 on:** Apr 08, 2008, 12:55:53 PM »

David, I checked last night and the corners are beat up, the tailgate sheet metal looks good but I didn't have time to test the window.

lilrichey85 · « **Reply #11 on:** Apr 08, 2008, 02:09:17 PM »

How much for the shifter boots with shipping to 32217?

TXSS · « **Reply #12 on:** Apr 08, 2008, 03:34:05 PM »

Do you know if they are the same as an 83? I used the ones from the 4 runner in my mini when I swapped drivetrains. I still have the one from my 83 if it will work for you....just the rubber part.

lilrichey85 · « **Reply #13 on:** Apr 09, 2008, 02:57:55 PM »

Not sure if its the same or not can you snap a pic so that i can tell....

jtaco1 · « **Reply #14 on:** Apr 16, 2008, 06:02:45 AM »

You still got the IFS hub bodies, where the rotor attaches?

pyrosnow911 · « **Reply #15 on:** Apr 17, 2008, 11:47:14 AM »

do you have the center console stuff? i need the switches.... and if it had a heater then i would take it all.

TXSS · « **Reply #16 on:** Apr 17, 2008, 12:15:56 PM »

I don't think the switchs would be working, the interior was covered in 1/2 inch of mud and had been left outside with no windsheild or window.

lolrichey, the rubber boot is different. I checked it against the one i had.

pyrosnow911 · « **Reply #17 on:** Apr 17, 2008, 03:39:22 PM »

could i buy the window up and down switch from you anywho for a decent price and if it doesnt work then owell i look for anotherr one?

TXSS · « **Reply #18 on:** Apr 17, 2008, 03:53:55 PM »

truck had non-power windows. just had the lock bottons in the console.

pyrosnow911 · « **Reply #19 on:** Apr 17, 2008, 04:04:15 PM »

it doesnt have the rear window up and down switch?

TXSS · « **Reply #20 on:** Apr 19, 2008, 05:38:10 PM »

found the rear window switch, PM me your address and I will send it to you.

TXSS [OP]

TXSS [OP]

TXSS [OP]

TXSS [OP]

TXSS [OP]

TXSS [OP]

TXSS [OP]

TXSS [OP]

TXSS [OP]

TXSS [OP]

Related Topics