Author Topic: my rig (Read 1925 times)

NWyoat · « **on:** Feb 18, 2004, 02:16:29 PM »

I have an '85 pickup

NWyoat · « **Reply #1 on:** Feb 18, 2004, 02:17:08 PM »

what do you other members have

NWyoat · « **Reply #2 on:** Feb 18, 2004, 02:33:53 PM »

I started with a stock '85 short bed reg. cab (efi w/5spd). for the front suspension it I used toyota rears, the way I did this moved my axel forward about 6.5 inches, made droped spring hangers, u-bolt flip, longer shackels I also made a crossover steering arm and draglink.

79Yota20r · « **Reply #3 on:** Feb 18, 2004, 02:36:26 PM »

i have a 79 toyota truck 4wd stock exept for a header and weaber carb

NWyoat · « **Reply #4 on:** Feb 18, 2004, 02:44:27 PM »

I have wagoneers in the rear with buggy leaf and home made perches, shackles, flip kit

NWyoat · « **Reply #5 on:** Feb 18, 2004, 04:22:03 PM »

I also installed a marlin crawler kit, 5.29s, detroit front, ez-lock rear, wider rearend ('88), longfeilds, I made a flatbed w/ LED tail lights, I fabed the font bumper, warn upright 8000lb winch, 35" boggers, I recently bought a set of 38" tls radials on black steel wheels with a 2.5" offset. If you have questions about it just ask.

84runner · « **Reply #6 on:** Feb 19, 2004, 10:05:00 AM »

Well head on over to readers rides and take a look at everyone else's and put your up there too

Author Topic: my rig (Read 1925 times)

NWyoat

my rig

NWyoat [OP]

Re:my rig

NWyoat [OP]

Re:my rig

79Yota20r

Re:my rig

NWyoat [OP]

Re:my rig

NWyoat [OP]

Re:my rig

84runner

Re:my rig


	Author Topic: my rig (Read 1925 times) 0 Members and 1 Guest are viewing this topic. NWyoat Rock Crawl'n Turtle Points: 0 Posts: 44 Member since Feb '04 shake'n bake my rig « on: Feb 18, 2004, 02:16:29 PM » I have an '85 pickup Logged my half doors have beer holders. NWyoat [OP] Rock Crawl'n Turtle Points: 0 Posts: 44 Member since Feb '04 shake'n bake Re:my rig « Reply #1 on: Feb 18, 2004, 02:17:08 PM » what do you other members have Logged my half doors have beer holders. NWyoat [OP] Rock Crawl'n Turtle Points: 0 Posts: 44 Member since Feb '04 shake'n bake Re:my rig « Reply #2 on: Feb 18, 2004, 02:33:53 PM » I started with a stock '85 short bed reg. cab (efi w/5spd). for the front suspension it I used toyota rears, the way I did this moved my axel forward about 6.5 inches, made droped spring hangers, u-bolt flip, longer shackels I also made a crossover steering arm and draglink. Logged my half doors have beer holders. 79Yota20r Dusty Trails Turtle Points: 0 Posts: 9 Member since Feb '04 Crawling with Marlin Re:my rig « Reply #3 on: Feb 18, 2004, 02:36:26 PM » i have a 79 toyota truck 4wd stock exept for a header and weaber carb Logged NWyoat [OP] Rock Crawl'n Turtle Points: 0 Posts: 44 Member since Feb '04 shake'n bake Re:my rig « Reply #4 on: Feb 18, 2004, 02:44:27 PM » I have wagoneers in the rear with buggy leaf and home made perches, shackles, flip kit Logged my half doors have beer holders. NWyoat [OP] Rock Crawl'n Turtle Points: 0 Posts: 44 Member since Feb '04 shake'n bake Re:my rig « Reply #5 on: Feb 18, 2004, 04:22:03 PM » I also installed a marlin crawler kit, 5.29s, detroit front, ez-lock rear, wider rearend ('88), longfeilds, I made a flatbed w/ LED tail lights, I fabed the font bumper, warn upright 8000lb winch, 35" boggers, I recently bought a set of 38" tls radials on black steel wheels with a 2.5" offset. If you have questions about it just ask. Logged my half doors have beer holders. 84runner The 2.5K Group Turtle Points: 99 Posts: 2,797 Member since Dec '02 Re:my rig « Reply #6 on: Feb 19, 2004, 10:05:00 AM » Well head on over to readers rides and take a look at everyone else's and put your up there too Logged RUBICON TESTED BIG BALLS APPROVED