Topic: DRIVE SHAFTS

[shiftless89]

I bought a bunch of used rear driveshafts from 03 and up 4runners (also fits gx 470's). these are complete flange to flange units with good u-joints, slip yokes and flanges . OEM part number 37110-6A480. most have less than 5K miles and are like new the worst has about 10k miles on it and is still like new. I bought them to use in making trail spares (square tube) for myself and my local club, and have quite a few left. retail is 540.00 each (NEW).  I'm selling for 80.00 shipped anywhere in the lower 48. discounts for multiple units

for 03 and up 4x4 4runners its a bolt in spare!! the flange pattern (4 bolt holes) is standard toyota. we even matched them up to the pattern in an 85 pick up. they seem to be higher angle than the earler versions. original Toyota equipment

1 shipped 80.00
2 shipped 140.00

local pick up 50.00

Mike

[SQUIRREL MONSTER]

i have an 84 x-cab. know if it'd bolt up to my stock flanges?? im all over one of those if it fits the bill. how long is it? (compressed) and (fully extended)

also where are you located??

[shiftless89 [OP]]

sorry, I'm in DFW.  I'll get measurements later today
Mike

[SQUIRREL MONSTER]

DFW?? not familiar with the area    thanks.

[welchct]

dallas/fort worth
it is in Texas

[SQUIRREL MONSTER]

ah ok, thanks welchct. im a bit slow.... must be all this cali sun. haha!

[RHG]

  Hey buddy TX has more sun than you know what to do with. I did my time there. San Antonio in July and August is no fun. But back on topic...im interested in the measurements as well.

[shiftless89 [OP]]

1ST grade art!  remember I got these to be donors for square tube shafts,  If it fits, even better



EDIT THE BOLT HOLE CENTERS ARE 6.5CM ON BOTH ENDS  NOT 6.5 AND 7

[RHG]

Looks better than my kindergarten style art work Cool thanks

[SQUIRREL MONSTER]

Hey buddy TX has more sun than you know what to do with. I did my time there. San Antonio in July and August is no fun. But back on topic...im interested in the measurements as well.

you sure? last i checked... cali is in a current drought. i thought you guys were at the tail end of "hurricane alley"    anyhow. looks like i may be getting one of these from ya shiftless. as it sais in your art work (as they sit) they are 57 inches compressed and 64 inches extended). what size bolts do they utilize? im almost sure it'll bolt right up to my stock output flangesbut im not sure. im goin out to measure them right now.

[shiftless89 [OP]]

Sorry I haven't got back sooner.   One side will fit your truck for sure, I'm checking on the other flange still.  it will probably be Monday before I get back to you!  (out of town and family re-onion)

later
Mike

[SQUIRREL MONSTER]

hey, no problemo. thanks. not in a giant rush so its cool. keep us posted.

[shiftless89 [OP]]

ok, I checked this shaft against my 1st gen flanges.  the older flanges are 1 cm smaller 5.5 cm instead of 6.5 so to use you would have to drill them out,  here is some better pics

[shiftless89 [OP]]

still got em....  great deal on a spare for your 4runner

[SQUIRREL MONSTER]

still havent had the time to measure. been real busy but im doin some work to it today. ill holler at you later tonight and see what i come up with.

[shiftless89 [OP]]

still have some left..  make a serious offer on one or several

[RHG]

I'll take two, you have a PM please reply as soon as possible.

[shiftless89 [OP]]

you got pm