Topic: R150F + 4 Cyl. T-Case

[1Bad4Runner]

Do I need an adapter to put these together?

If I do, I would rather buy another tranny to do the swap because I will be putting a dual case in the truck. So I guess my other question is, what tranny should I buy that will bolt up to my 3.0L? 

[WHITE_TRASH]

The only other yota trans that will easily bolt up to the 3.slow is a r151f.  It'll also bolt up to a 23 spline 4 cyl case directly.  But for the cost of a r151f you could buy 2 adapters to mate a 4 cyl case to a r150f..... 

You could also swap the output housing on the r150f to one from a r151f but then again cost would suck.

[1Bad4Runner [OP]]

I'm thinking of doing a Chevy 350 swap, should I just get one of the older transmissions and do a swap instead?
I already have the adapter plate that puts a chevy bellhousing on a toyota tranny, but I'm not sure what one it bolts up to.

I already have a stock 4 cyl t-case in my basement, since it was a spare for my old truck and I sold it awhile ago.

[UNBREAKABLE]

I have the adapter to put a toy t-case behind a TH350 if you are interested.

[1Bad4Runner [OP]]

Nah, I don't want an auto... but thanks.

[Snowtoy]

You can get everything you need for dual t-cases from marlin for about $1500-2K(both adapters and dual 32 spline output shafts, or buy one already built).

[1Bad4Runner [OP]]

That is very expencive, and then I would have to get it shipping to Canada, I will be buying my dual case adapted from Sky's Manufacturing proboly because the shipping will be cheaper... I will also get a quote from Marlin too.

What tranny do I need to replace the R150F? Is there any way to use my R150F bellhousing on a W56 or something?

[kyle_22r]

if you do the 350 swap, run a chevy SM465 and just buy a toy t-case adaptor from OTT(they're in canada)

[1Bad4Runner [OP]]

With the price of gas the way it is I don't know if I really want to go bigger, I know where there is a good deal on a Supra engine.