Topic: FS/Trade: Dana 44 fronts for toyota

[Pat]

I am getting rid of all my Dana 44 stuff. all chevy six lug passanger drop standard cut,,,. I have one pretty much complete 44 but in pieces .. FLAT TOP KNUCKLES pass side not milled and drilled yet. spindals hubs calipers, rotors , backing plates,and so on. Plus I have almost another 44 but I know I am short a axle or 2 and it has no knuckles. stock gears 3.07?. As far as the housings There are 2.. Both full width now but I will narrow one 2 62 inches and ROTATE KNUCKLES FOR BETTER PINION ANGLE and set it with toyota spring pad width.. I have a full set of u bolts with the ubolt plates this would make a great set up for some body wanting a wider 44 for a toyota plus you would have some spare parts for when you break Gettin it!!! I will also make your tie rod and drag link for them once you are ready to put your steering on.. Supply me with DOM .. I can drill and tap them for Chevy one ton ends I want $$$$$$400.00

BTW.. at 62" you would need to get 2 junk yard axles .. wagoneer short and dodge long I believe.. or visa versa.. so it make it nice to have stock type axle to replace with..no custom stuff



Stuff I am willing to trade for...

TOYOTA front axle
Toyota diffs 4.88's or maybe 4.56's or 5.29's
toyota lockers?
toyota high steer arms, skys, kongs, ott's only

[superonaldean]

hey there do you still have the 44's i have toyota front and rear axles with arbs in them and the compressor that i am going to be getting rid of. if you still have them let me know and maybe we can work something. thanks

ron

[yota83]

i have a set of 79-83 toyota axles with 5.29's, welded rear, tru-trac front with three runs on it and new R&P.....
im in the bay area so i will pick the axle's up...
so ill give you everything in trade.. lockers, gears and axle's???

[wheeloverhondas]

hey super ronald, ive got some 3/4 ton axles ill trade you, dana 60s