0 Members and 1 Guest are viewing this topic.
Center then tube relative to the frame so each end of the tube is sticking out the sides equally?
Having not done this myself, I suspect this first interpretation is correct.But... measure measure measure. You have the front hanger piece, which sets the width at the front of the spring. In theory the rear measurements should be the same. I would check the center-to-center measurement on this front hanger, that is the center of each leaf spring eyelet when installed in the hanger. That should match the center-to-center measurement of the frame tubes.
Started by Jase Engine
Started by dov'd85 Parts For Sale
Started by MiniSimp Engine
Started by SloCrawler Project Research and Build-Ups
Started by Rock4Runner Parts For Sale