I currently have a first gen with the current specs:
98 3rz out of a 2wd 4runner
W56b with dual cases, stock gearing
Yota ifs width front and rear with elockers (4.30s)
Bobbed short bed (took 10in out)
315/75r16 tires (~35s)
4in all pro springs in the rear and rears up front
Bent front frame
Crushed inner fender, from previous owner crashing it.
A recently bent front axle housing
I also recently bought the old frame that was underneath the punkin truck Justin from all pro built. The frame is set up with an all pro 3link kit and a tube bed. The tube bed is getting cut off and given to my brother (tan truck) the frame also came with a pretty sweet front bumper.
I also recently bought a 79 running and driving truck for the cab. It has a good windshield, sunroof and most importantly a straight cab. It does however have the standard first gen floorboard rust that I'm going to have to deal with.
The plan is to build up a diamond axle housing with yota outers and 8in elocker center section that's +6 width. I'll be using sa hubs to help improve my steering. Once this is built I'll starting putting it under punkins old frame using king? 2in body 12in travel coilovers and Johnny joints on all the links. Once the front suspension is done, lil blue will be torn apart and the 3rz, tranny, tcases and rear axle will all my transferred over. In the mean time while I save up for the link parts I'll be cleaning up the red cab and repainting it the same color as the blue truck and cleaning up the floors.
I'll post pictures when I get home later today