« on: Aug 15, 2011, 12:53:12 PM »
ive made 40 odd bumpers and side steps with one of there and works well there are limitations with it but when you get used to it its fine i have made one modifcation to it by adding an adjustble stop. this alows me to make repete bends and with bumpers i can get matching bends on each side
![](http://i239.photobucket.com/albums/ff26/monstertruckman4x4/678.jpg)
![](http://i239.photobucket.com/albums/ff26/monstertruckman4x4/684.jpg)
![](https://board.marlincrawler.com/Themes/MCI_V3C/images/ip.gif)
Logged
hilux 82 with mk3 2.4d engine. bobed 18 inches, full soft top, 9 inches of lift,exo cage,swing out tyre carrier, front tube winchbumper with x9, rock sliders, rear tube bumper, front truetrac and rear arb lockers, twin trans adapter with 4.7 crawler gears,20 forward and 4 reverse gears, 38 inch super swampers , rear disc brake conversion, trans disc parking brake, 5.29 r&p ,rear bench seat,hand throtle,custom storage boxes, custom made snorkel,onboard air compressor,cb twin bateries,split charge system, diff guards, low profile gearbox mo