Here ya go. they will probly show up as red x's, but if you click on the box you can see em.
I'm making a bit of progress on the front 3 link. i am moching up the lower links and seeing how things are gonna fit. right now i have the links set at 34" long for the lowers. The front axle is in position and setup at full bump. I actually tacked a piece of scrap steel from the frame to the axle on each side to hold it in place. i moved the axle forward about 2 more inches from where it was. Tonight I cut about an inch and a half off the bottom of the framerails on each side so the lowers can tuck up close and hopefully the frame mounts wont be hanging down too far.