Not fare, you cheated, you ditched the OEM frame and went full width. So much easier, "room wise" when you do.
Good job.
WRONG! getting my stuff to fit is damn near impossible. if you ever see it in person come look at it. im stubborn and want to run mid/hysteer. if i ran my tie rod on the OEM knuckle location i would have been done a week ago.
for example:
the panhard bar is an 1/8" from the top diff cover bolt.
the tie rod kisses the panhard frame bracket and the axle end bracket.
the heim on the pitman arm will just miss the tie rod.
the upper link mount is an 1/8" from the block/oil pan.
