Perfect. thanks for the info!
Any truck/ 4-Runner seats up through the 3rd gen 4-Runner and the 1st gen Tacoma's will work, and should be a direct bolt-in. @nd gen Runner seats will also work in for the rear seat w. some modifications. Other seats that will work for the front seats w/ little to no modification are Supra, MR2, Celica, Camry, or other Toyota seats pre('00). Honda Civic, Accord, Prelude seats from the '90's and early 2000's will also work. You can also pull the old mounts off and weld them to new seats and then it is a direct bolt-in process. If you are over 5'8 you will want to avoid sedan seats, they tend to be thicker seats. The set of 2000 Accord seats I installed in an '85 X-cab I restored reduced the headroom a lot, fortunately the buyer of the truck was short and found them to be perfect.