Okay, now that I cleaned the Throttle Body, AFM, AIC and everything else invloved in there... it idles between 2000-2500rpm
.
When I cleaned the AIC I took it completly apart because it was so gummed up. Everything moved freely, it was clean as a whistle and so I reassembled everything as it was. It then idles high. So, I took it all apart again and checked it all, put it back together and nothing changed. So, took it apart againg and messed with some of the adjustments and put it back together. Idles closer to 2000. If I unplug the AIC it drops to 1500.
The barrel valve in the AIC, when taken out, is not fully closed. Is this the problem? I assume this is the factory set idle.
On the plus, there is a lot more power in the engine now.
HELP ASAP!
