whats the bearing pillow block part number you used i found like 50 diffrent styles to fit the shaft but not one i could mis align a little bit for better angle ..
I do not know the PN on the bearing. I just asked for a 1.5 H-D PB bearing. Do not really have a write-up on install so I will do the best I can.
Cut the horse collar and built a frame work out of 3 x .25 steel plate.
This is what the bearing looks like. This bearing has some misaligment built into it.
The bearing mounts to this bracket and slips inside the framework.
The bracket is only bolted into the framework with two bolts and allows for up and down and angle adjustment also.
Mods made to the d-shaft.
