whats the bearing pillow block part number you used i found like 50 diffrent styles to fit the shaft but not one i could mis align a little bit for better angle ..
I do not know the PN on the bearing. I just asked for a 1.5 H-D PB bearing. Do not really have a write-up on install so I will do the best I can.
Cut the horse collar and built a frame work out of 3 x .25 steel plate.
![](http://pics.montypics.com/oops/2010-04-08/1270759427_center_bearing.jpg)
This is what the bearing looks like. This bearing has some misaligment built into it.
![](http://pics.montypics.com/oops/2010-04-08/1270759510_center_bearing__1_.jpg)
The bearing mounts to this bracket and slips inside the framework.
![](http://pics.montypics.com/oops/2010-04-08/1270759670_center_bearing__2_.jpg)
The bracket is only bolted into the framework with two bolts and allows for up and down and angle adjustment also.
![](http://pics.montypics.com/oops/2010-04-08/1270759981_center_bearing__3_.jpg)
Mods made to the d-shaft.
![](http://pics.montypics.com/oops/2010-04-08/1270760110_center_bearing__7__1.jpg)